From: "Mark A. Greer" <mgreer@mvista.com>
To: Neil Wilson <NWILSON@Airspan.com>
Cc: "'linuxppc-embedded@lists.linuxppc.org'"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: Sandpoint 3 + MPC7450 + HHL2
Date: Thu, 28 Jun 2001 10:03:11 -0700 [thread overview]
Message-ID: <3B3B634F.E6B9FBFC@mvista.com> (raw)
In-Reply-To: E69FF45ADA3BD511A25900047623CC4F12AA76@JUPITER
Neil Wilson wrote:
> Got it working now....
>
> Not sure if these fixes are just Sandpoint3 or MPC7450 or the combination,
> but...
>
> 1) The openpic_init call in sandpoint_init_IRQ needs the offset argument to
> get the SIO int setup.
Are you sure you want to do this??? The intsenses stuff in sandpoint_setup.c
is the way it is for a very good reason. Can you send me your patch so I can
take a look? Also, can you send the switch settings that you are using.
> 2) I also needed to add a enable of the TBEN in HID0 (bit 0x04000000) just
> to get the kernel to think about booting at all - I put this in the
> decompress_kernel function.
I think that your sandpoint-specific boot head.S or somewhere else like that
would be a much better choice than the ppc-generic decompress_kernel routine.
> Do these sort of changes need pushing into the source tree ?, and if so
> would anyone care to explain how a newcommer does this, thanks.
Let's hold off on this until people who have sandpoints can take a look.
Mark
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2001-06-28 17:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-28 6:51 Sandpoint 3 + MPC7450 + HHL2 Neil Wilson
2001-06-28 17:03 ` Mark A. Greer [this message]
2001-06-28 17:13 ` Mark A. Greer
-- strict thread matches above, loose matches on Subject: below --
2001-06-29 11:28 Neil Wilson
2001-06-28 20:15 Neil Wilson
2001-06-28 20:06 Neil Wilson
2001-06-27 9:08 Neil Wilson
2001-06-27 16:48 ` Mark A. Greer
2001-06-29 8:14 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B3B634F.E6B9FBFC@mvista.com \
--to=mgreer@mvista.com \
--cc=NWILSON@Airspan.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.