From: "Adam D. Scislowicz" <adams@fourelle.com>
To: linux-kernel@vger.kernel.org
Cc: adams@fourelle.com
Subject: IDE0/Slave Detection Fails 2.4.x(2.4.4, 2.4.5, 2.4.5-ac18, and 2.4.6 tested) ** still unresolved
Date: Mon, 09 Jul 2001 10:05:07 -0700 [thread overview]
Message-ID: <3B49E443.8C89C954@fourelle.com> (raw)
I am having a problem where the 2.4.x(2.4.4, and 2.4.5, 2.4.5-ac18, and
2.4.6)
kernel does not detect the IDE0/primary slave device. If I put a third
drive in the system as IDE1/secondary master then that is detected.
However
the IDE0/primary slave is never detected.
Using the 2.2.19 kernel the IDE0/primary slave device IS detected
properly.
The 2.2.19 and 2.4.x kernels used were compiled with support for SMP. I
experimented with several different compile-time and run-time options
with no luck.
Below is some more detailed info.
-Adam Scislowicz <adams@fourelle.com>
* note: Please CC me in your response as I do not subscribe to this
mailing list.
* note: I have tested this on several different machines(all SMP Intel
BX or GX
chipset boards)
[ My IDE Controller Info (2.2.19:/proc/pci) ]
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xffa0 [0xffa1].
[ The 2.2.19 Kernel Init Messages ]
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA THNCF032MAA, ATA DISK drive
hdb: IBM-DARA-206000, ATA DISK drive
hdc: ST320420A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA THNCF032MAA, 31MB w/2kB Cache, CHS=496/4/32
hdb: IBM-DARA-206000, 5729MB w/418kB Cache, CHS=730/255/63, UDMA
hdc: ST320420A, 19458MB w/2048kB Cache, CHS=39535/16/63, UDMA
[ The 2.4.5-ac18 Kernel Init Messages ]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA THNCF032MAA, ATA DISK drive
hdc: ST320420A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 63488 sectors (33 MB) w/2KiB Cache, CHS=496/4/32, DMA
hdc: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63,
UDMA(33)
reply other threads:[~2001-07-09 17:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B49E443.8C89C954@fourelle.com \
--to=adams@fourelle.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.