From: Adam Wozniak <adam.wozniak@comdev.cc>
To: linuxppc-dev@lists.linuxppc.org
Subject: Re: fcc_enet Phy detection
Date: Thu, 19 Jul 2001 10:35:38 -0700 [thread overview]
Message-ID: <3B571A6A.AFAE4844@comdev.cc> (raw)
In-Reply-To: 3B5708DD.E0788B8B@comdev.cc
Is this normal?
eth0 Link encap:Ethernet HWaddr 08:00:22:70:70:63
inet addr:192.168.67.56 Bcast:192.168.67.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9586 errors:0 dropped:0 overruns:0 frame:0
TX packets:6231 errors:43 dropped:0 overruns:43 carrier:6188
collisions:7 txqueuelen:100
RX bytes:4919915 (4.6 Mb) TX bytes:741495 (724.1 kb)
Base address:0x8600
I'm getting a "carrier lost" for every sent packet.
When I telnet in, the telnet session hangs, usually after a few
commands,
and the "overruns" (typo? should be underruns?) and "errors" increment
by either 2 (typical) or 1 (sometimes).
Any help is appreciated.
--Adam
--
Adam Wozniak (KG6GZR) COM DEV Wireless - Digital and Software Systems
awozniak@comdev.cc 3450 Broad St. 107, San Luis Obispo, CA 93401
http://www.comdev.cc
Voice: (805) 544-1089 Fax: (805) 544-2055
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2001-07-19 17:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-07-19 16:20 fcc_enet Phy detection Adam Wozniak
2001-07-19 17:35 ` Adam Wozniak [this message]
2001-07-23 18:26 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B571A6A.AFAE4844@comdev.cc \
--to=adam.wozniak@comdev.cc \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.