From: J Sloan <jjs@pobox.com>
To: Garett Spencley <gspen@home.com>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: Q3A segfaults with 2.4.8
Date: Sat, 11 Aug 2001 23:42:05 -0700 [thread overview]
Message-ID: <3B76253D.973E3593@pobox.com> (raw)
In-Reply-To: <Pine.LNX.4.33L2.0108112137350.17803-100000@localhost.localdomain>
Q3a works fine for me, as before.
My current configuration:
Red Hat 7.1 + all updates
Xfree86 4.1 (rawhide rpms)
kernel 2.4.8 + Andrew Morton's low latency patches.
Penium III 933/512 MB RAM/Voooo 3 AGP
cu
jjs
Garett Spencley wrote:
> Hi,
>
> I have no idea how to debug this so some insight would be very helpful.
> Quake3 arena is crashing with 2.4.8 and 2.4.8-ac1.
>
> I'm pretty sure it's related to the emu10k1 changes because the last
> output is:
>
> ...loading 'scripts/sky.shader'
> ...loading 'scripts/test.shader'
> ----- finished R_Init -----
>
> ------- sound initialization -------
> ------------------------------------
> Received signal 11, exiting...
>
> It works fine with 2.4.7 and -ac series.
>
> Here's my system info:
>
> Mandrake 8.0
>
> Linux version 2.4.8-ac1 (root@localhost.localdomain) (gcc version 3.0) #1
> Sat Aug 11 18:16:04 EDT 2001
>
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 2
> model name : AMD Athlon(tm) Processor
> stepping : 1
> cpu MHz : 704.960
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 1405.74
>
> $ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03e8-03ef : serial(auto)
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0400-040f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0cf8-0cff : PCI conf1
> 9000-9fff : PCI Bus #01
> 9c00-9cff : 3Dfx Interactive, Inc. Voodoo 3
> c800-c81f : Creative Labs SB Live! EMU10000
> c800-c81f : EMU10K1
> cc00-ccff : Realtek Semiconductor Co., Ltd. RTL-8139
> cc00-ccff : 8139too
> d000-d01f : VIA Technologies, Inc. UHCI USB
> d000-d01f : usb-uhci
> d400-d41f : VIA Technologies, Inc. UHCI USB (#2)
> d400-d41f : usb-uhci
> d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller
> dc00-dc07 : Creative Labs SB Live!
> dc00-dc07 : emu10k1-gp
> ffa0-ffaf : VIA Technologies, Inc. Bus Master IDE
> ffa0-ffa7 : ide0
> ffa8-ffaf : ide1
>
> $ cat /proc/iomem
> 00000000-0009efff : System RAM
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-09ffffff : System RAM
> 00100000-0026e5e9 : Kernel code
> 0026e5ea-002db53f : Kernel data
> dfc00000-e3cfffff : PCI Bus #01
> e0000000-e1ffffff : 3Dfx Interactive, Inc. Voodoo 3
> e4000000-e7ffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller
> ebdfd000-ebdfdfff : Brooktree Corporation Bt878
> ebdfd000-ebdfdfff : bttv
> ebdfe000-ebdfefff : Brooktree Corporation Bt878
> ebdff000-ebdfffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller
> ebe00000-efefffff : PCI Bus #01
> ec000000-edffffff : 3Dfx Interactive, Inc. Voodoo 3
> efffff00-efffffff : Realtek Semiconductor Co., Ltd. RTL-8139
> efffff00-efffffff : 8139too
>
> # lspci -vvv
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
> Region 1: Memory at ebdff000 (32-bit, prefetchable) [size=4K]
> Region 2: I/O ports at d800 [disabled] [size=4]
> Capabilities: [a0] AGP version 1.0
> Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x1
>
> 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: ebe00000-efefffff
> Prefetchable memory behind bridge: dfc00000-e3cfffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 1b)
> Subsystem: Asustek Computer, Inc.: Unknown device 800d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) (prog-if 8a [Master SecP PriP])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 4: I/O ports at ffa0 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 0e) (prog-if 00 [UHCI])
> Subsystem: Unknown device 0925:1234
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, cache line size 08
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at d000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 0e) (prog-if 00 [UHCI])
> Subsystem: Unknown device 0925:1234
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, cache line size 08
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 20)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
> Subsystem: AOPEN Inc. ALN-325C
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at cc00 [size=256]
> Region 1: Memory at efffff00 (32-bit, non-prefetchable) [size=256]
>
> 00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
> Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ebdfd000 (32-bit, prefetchable) [size=4K]
>
> 00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
> Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at ebdfe000 (32-bit, prefetchable) [size=4K]
>
> 00:10.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
> Subsystem: Creative Labs CT4832 SBLive! Value
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at c800 [size=32]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.1 Input device controller: Creative Labs SB Live! (rev 07)
> Subsystem: Creative Labs Gameport Joystick
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Region 0: I/O ports at dc00 [size=8]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:05.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
> Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=32M]
> Region 1: Memory at e0000000 (32-bit, prefetchable) [size=32M]
> Region 2: I/O ports at 9c00 [size=256]
> Expansion ROM at efef0000 [disabled] [size=64K]
> Capabilities: [54] AGP version 1.0
> Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Thanks in advance for any help,
>
> --
> Garett Spencley
>
> I encourage you to encrypt e-mail sent to me using PGP
> My public key is available on PGP key servers (http://keyservers.net)
> Key fingerprint: 8062 1A46 9719 C929 578C BB4E 7799 EC1A AB12 D3B9
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-08-12 6:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-12 1:48 Q3A segfaults with 2.4.8 Garett Spencley
2001-08-12 3:04 ` Daniel T. Chen
2001-08-12 6:42 ` J Sloan [this message]
[not found] <Pine.LNX.4.10.10108120314450.5761-100000@coffee.psychology.mcmaster.ca>
2001-08-12 14:40 ` Garett Spencley
[not found] <Pine.LNX.4.33.0108121643020.9470-100000@boris.prodako.se>
2001-08-12 16:01 ` Garett Spencley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B76253D.973E3593@pobox.com \
--to=jjs@pobox.com \
--cc=gspen@home.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.