Re: Update for RedHat 7.1

[Carsten Langgaard <carstenl@mips.com>]

I have installed your new set of RedHat7.1 RPMs, and tried to build Perl
natively.
But it fails with the following message:

`sh  cflags libperl.a toke.o`  toke.c
          CCCMD =  gcc -DPERL_CORE -c -fno-strict-aliasing
-I/usr/local/include
-O2

Cannot allocate 2676168 bytes after allocating 3899765696 bytes
make: *** [toke.o] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.43439 (%build)

RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.43439 (%build)


I have build perl natively with your pervious set of RedHat7.1 RPMs,
without any problems.

/Carsten


"H . J . Lu" wrote:

> I updated a few packages, fixed a linker bug and rebuilt everything.
>
> H.J.
> ----
> My mini-port of RedHat 7.1 is at
>
> ftp://oss.sgi.com/pub/linux/mips/redhat/7.1/
>
> you should be able to put a small RedHat 7.1 on the mips/mipsel box and
> compile the rest of RedHat 7.1 yourselves.
>
> Here are something you should know:
>
> 1. The cross compiler hosted on RedHat 7.1/ia32 is provided as a
> toolchain rpm. The binary rpms for the mips and mipsel cross compilers
> are included. You will need glibc 2.2.3-11 or above to use those
> rpms. The glibc x86 binary rpms under RPMS/i386 should be ok.
> 2. You have to find a way to put those rpms on your machine. I use
> network boot and NFS root to do it.
> 3. install.tar.bz2 has some scripts to prepare NFS root and install
> RedHat 7.1 on a hard drive.
> 4. baseline.tar.bz2 contains the cross build tree.
>
> Thanks.
>
> H.J.

--
_    _ ____  ___   Carsten Langgaard   Mailto:carstenl@mips.com
|\  /|||___)(___   MIPS Denmark        Direct: +45 4486 5527
| \/ |||    ____)  Lautrupvang 4B      Switch: +45 4486 5555
  TECHNOLOGIES     2750 Ballerup       Fax...: +45 4486 5556
                   Denmark             http://www.mips.com