From: Alfred Munnikes <munnikes@cistron.nl>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: spurious 8259A interrupt: IRQ7. AND VM: killing process ..
Date: Wed, 26 Sep 2001 18:22:26 +0200 [thread overview]
Message-ID: <3BB200C2.7D7E84B4@cistron.nl> (raw)
Hello
With a new compiled kernel 2.4.10 I have the next problem's
first is gives the message "spurious 8259A interrupt: IRQ7." and I
don't think that is normal for a PCI clock generator.
seconds, I have problem while I do 'md5sum a_cd_image_from_650_MByte'
The VM is killing a lot of processes while I have 512 MByte RAM and a
170 MB swap partition and there is only a just started machine with a
few services (take only 20 to 40 MByte ram)
The VM starts killing while the swap is only full for around 9 to 15
MByte (I cannot take a 'free' snapshot from that, while de bash is
killed every time) while there is room for +/- 170 MByte
I have a Abit KT7-raid with KT133 chipset, may the problem a hardware
problem.
And I'm not on a list, so if you want some more information or want to
reply, please mail 'munnikes AT cistron.nl'
Alfred Munnikes.
---------------------
Here is soms output that can help or can declare firmly my story.
'free' (before starting 'md5sum a_big_file')
total used free shared buffers
cached
Mem: 513460 71956 441504 0 30840
23140
-/+ buffers/cache: 17976 495484
Swap: 176636 0 176636
'ps aux' (before starting 'md5sum a_big_file')
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 5.0 0.0 1020 460 ? S 18:05 0:04 init
root 2 0.0 0.0 0 0 ? SW 18:05 0:00 [keventd]
root 3 0.0 0.0 0 0 ? SW 18:05 0:00
[kapm-idled]
root 4 0.1 0.0 0 0 ? SWN 18:05 0:00
[ksoftirqd_CPU0]
root 5 0.0 0.0 0 0 ? SW 18:05 0:00 [kswapd]
root 6 0.0 0.0 0 0 ? SW 18:05 0:00 [bdflush]
root 7 0.0 0.0 0 0 ? SW 18:05 0:00
[kupdated]
root 67 0.0 0.0 0 0 ? SW 18:05 0:00
[kreiserfsd]
daemon 89 0.0 0.0 1132 420 ? S 18:05 0:00
/sbin/portmap
root 431 0.0 0.1 1352 628 ? S 18:05 0:00
/sbin/syslogd
root 433 0.2 0.2 1660 1096 ? S 18:05 0:00
/sbin/klogd
root 439 0.0 0.1 1056 544 ? S 18:05 0:00
/sbin/rpc.statd
root 447 0.0 0.1 1752 788 ? S 18:05 0:00
/usr/X11R6/bin/fontfs -daemon
root 451 0.0 0.0 1048 440 ? S 18:05 0:00
/usr/sbin/gpm -m /dev/psaux -t imps2 -l
"a-zA-Z0-9_.:~/\300-\326\330-\366\370-\377"
root 456 0.0 0.1 1300 544 ? S 18:05 0:00
/usr/sbin/inetd
root 465 0.0 0.1 1300 560 ? S 18:05 0:00
/usr/sbin/tcplogd -f
root 467 0.0 0.0 992 280 ? S 18:05 0:00
/usr/sbin/icmplogd -f
root 473 0.0 0.1 1352 560 ? S 18:05 0:00
/usr/sbin/lpd
root 481 0.0 0.1 1772 872 ? S 18:05 0:00 /bin/sh
/usr/bin/safe_mysqld
mysql 512 0.0 0.8 33408 4264 ? SN 18:05 0:00
/usr/sbin/mysqld --basedir=/usr --datadir=/home/mysql --user=mysql
--pid-file=/var/run/mysqld/mysqld.pid --skip-locking
mysql 515 0.0 0.8 33408 4264 ? SN 18:05 0:00
/usr/sbin/mysqld --basedir=/usr --datadir=/home/mysql --user=mysql
--pid-file=/var/run/mysqld/mysqld.pid --skip-locking
mysql 516 0.0 0.8 33408 4264 ? SN 18:05 0:00
/usr/sbin/mysqld --basedir=/usr --datadir=/home/mysql --user=mysql
--pid-file=/var/run/mysqld/mysqld.pid --skip-locking
mysql 518 0.0 0.8 33408 4264 ? SN 18:05 0:00
/usr/sbin/mysqld --basedir=/usr --datadir=/home/mysql --user=mysql
--pid-file=/var/run/mysqld/mysqld.pid --skip-locking
root 520 0.0 0.2 2236 1224 ? S 18:05 0:00
/usr/sbin/nmbd -D
root 522 0.0 0.1 2160 948 ? S 18:05 0:00
/usr/sbin/nmbd -D
root 523 0.0 0.2 2788 1252 ? S 18:05 0:00
/usr/sbin/smbd -D
proxy 540 0.0 0.1 1644 720 ? S 18:05 0:00
/usr/sbin/wwwoffled -c /etc/wwwoffle/wwwoffle.conf
root 543 0.0 0.5 4000 3028 ? S 18:05 0:00
/usr/bin/X11/xfs -daemon
root 547 0.0 0.1 1704 768 ? S 18:05 0:00
/usr/sbin/rpc.nfsd
root 549 0.0 0.1 1720 816 ? S 18:05 0:00
/usr/sbin/rpc.mountd
root 552 0.0 0.1 1308 536 ? S 18:05 0:00
/usr/sbin/cfsd
root 554 0.0 0.0 0 0 ? SW 18:05 0:00 [rpciod]
root 555 0.0 0.0 0 0 ? SW 18:05 0:00 [lockd]
root 560 0.0 0.1 1168 616 ? S 18:05 0:00
/usr/sbin/cron
root 565 0.2 0.6 39256 3500 ? S 18:05 0:00
/usr/sbin/apache
alfred 574 0.0 0.2 2008 1224 tty1 S 18:05 0:00 -bash
root 575 0.0 0.0 1004 452 tty2 S 18:05 0:00
/sbin/getty 38400 tty2
root 576 0.0 0.0 1004 452 tty3 S 18:05 0:00
/sbin/getty 38400 tty3
root 577 0.0 0.0 1004 452 tty4 S 18:05 0:00
/sbin/getty 38400 tty4
root 578 0.0 0.0 1004 452 tty5 S 18:05 0:00
/sbin/getty 38400 tty5
root 579 0.0 0.0 1004 452 tty6 S 18:05 0:00
/sbin/getty 38400 tty6
www-data 580 0.0 0.6 39256 3504 ? S 18:05 0:00
/usr/sbin/apache
alfred 600 0.0 0.2 3264 1480 tty1 R 18:06 0:00 ps aux
'cat /proc/pci'
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
2).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 34).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 16).
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].
Bus 0, device 7, function 4:
Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 48).
IRQ 11.
Bus 0, device 9, function 0:
Multimedia audio controller: Ensoniq CT5880 [AudioPCI] (rev 2).
IRQ 9.
Master Capable. Latency=32. Min Gnt=12.Max Lat=128.
I/O at 0xdc00 [0xdc3f].
Bus 0, device 11, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
(rev 0).
IRQ 10.
I/O at 0xe000 [0xe01f].
Bus 0, device 13, function 0:
Multimedia video controller: Brooktree Corporation Bt848 TV with DMA
push (rev 18).
IRQ 11.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xda002000 [0xda002fff].
Bus 0, device 15, function 0:
SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875J
(rev 4).
IRQ 11.
Master Capable. Latency=144. Min Gnt=17.Max Lat=64.
I/O at 0xe400 [0xe4ff].
Non-prefetchable 32 bit memory at 0xda000000 [0xda0000ff].
Non-prefetchable 32 bit memory at 0xda001000 [0xda001fff].
Bus 1, device 0, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
3).
IRQ 5.
Master Capable. Latency=32. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xd4000000 [0xd5ffffff].
Non-prefetchable 32 bit memory at 0xd6000000 [0xd6003fff].
Non-prefetchable 32 bit memory at 0xd7000000 [0xd77fffff].
'dmesg' output:
Linux version 2.4.10 (root@easydisk) (gcc version 2.95.2 20000220
(Debian GNU/Linux)) #1 Mon Sep 24 17:11:15 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: BOOT_IMAGE=linuxold ro root=305
BOOT_FILE=/vmlinuz.old
Initializing CPU#0
Detected 900.072 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1795.68 BogoMIPS
Memory: 513240k/524224k available (1441k kernel code, 10596k reserved,
470k data, 220k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 900.0498 MHz.
..... host bus clock speed is 200.0110 MHz.
cpu: 0, clocks: 2000110, slice: 1000055
CPU0<T0:2000096,T1:1000032,D:9,S:1000055,C:2000110>
PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x00
0x378: ECP settings irq=<none or set by other means> dma=<none or set by
other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(98)
parport0: assign_addrs: aa5500ff(98)
parport0: Printer, HEWLETT-PACKARD OFFICEJET PRO 1150C
parport_pc: Via 686A parallel port: io=0x378
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
block: 128 slots per queue, batch=16
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-307045, ATA DISK drive
hdc: QUANTUM FIREBALL CR6.4A, ATA DISK drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63,
UDMA(66)
hdc: 12594960 sectors (6449 MB) w/418KiB Cache, CHS=13328/15/63,
UDMA(33)
ide-floppy driver 0.97.sv
hdd: No disk in drive
hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: [PTBL] [784/255/63] hdc1 hdc2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 00:0b.0
eth0: RealTek RTL-8029 found at 0xe000, IRQ 10, 00:00:B4:B6:73:BC.
PPP generic driver version 2.4.1
Linux video capture interface: v1.00
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0f.0
PCI: Sharing IRQ 11 with 00:0d.0
sym53c8xx: at PCI bus 0, device 15, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875J detected with Symbios NVRAM
sym53c875J-0: rev 0x4 on pci bus 0 device 15 function 0 irq 11
sym53c875J-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c875J-0: on-chip RAM at 0xda001000
sym53c875J-0: restart (scsi reset).
sym53c875J-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
sym53c875J-0-<3,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
sym53c875J-0-<4,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16)
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
es1371: version v0.30 time 17:13:08 Sep 24 2001
PCI: Found IRQ 9 for device 00:09.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xdc00 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 220k freed
Adding Swap: 128484k swap-space (priority -1)
Adding Swap: 48152k swap-space (priority -2)
reiserfs: checking transaction log (device 03:09) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
spurious 8259A interrupt: IRQ7.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, cable problem? TSR=0x16, ISR=0x0, t=26.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx timed out, cable problem? TSR=0x16, ISR=0x0, t=23.
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
i2c-core.o: driver i2c msp3400 driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
bttv: driver version 0.7.72 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:0f.0
bttv0: Bt848 (rev 18) at 00:0d.0, irq: 11, latency: 32, memory:
0xda002000
bttv0: model: BT848A(MIRO PCTV pro) [insmod option]
msp34xx: init: chip=MSP3410D-B4, has NICAM support
msp3410: daemon started
bttv0: i2c attach [MSP3410D-B4]
i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos.
0).
tuner: chip found @ 0xc0
bttv0: i2c attach [(unset)]
i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 1).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: miro: id=12 tuner=5 radio=matchbox stereo=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process bash
__alloc_pages: 0-order allocation failed (gfp=0x1f0/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0xf0/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process top
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process syslogd
__alloc_pages: 0-order allocation failed (gfp=0xf0/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process apache
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process bash
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process nmbd
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process login
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process rpc.nfsd
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process bash
__alloc_pages: 0-order allocation failed (gfp=0x1d2/0) from c0129da6
VM: killing process rpc.mountd
(here is the old 2.4.9 kernel installed)
[/home/alfred]$ sh /usr/src/linux/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux easydisk 2.4.9 #1 Wed Sep 19 11:15:25 CEST 2001 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.9.5.0.37
util-linux 2.10s
mount 2.10s
modutils 2.4.6
e2fsprogs 1.22
reiserfsprogs 3.x.0j
PPP 2.4.1
Linux C Library 2.1.3
ldd: version 1.9.11
Procps 2.0.6
Net-tools 1.54
Console-tools 0.2.3
Sh-utils 2.0
Modules Loaded ipt_REJECT iptable_filter ip_tables ppp_deflate
bsd_comp ppp_async tvaudio bttv tuner msp3400 i2c-algo-bit i2c-core
nls_iso8859-1 nls_cp437 vfat
next reply other threads:[~2001-09-26 16:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-26 16:22 Alfred Munnikes [this message]
2001-09-26 17:00 ` PROBLEM: spurious 8259A interrupt: IRQ7. AND VM: killing process Ingo Molnar
2001-09-26 17:27 ` Alfred Munnikes
2001-09-26 19:43 ` Alfred Munnikes
-- strict thread matches above, loose matches on Subject: below --
2001-09-26 20:27 Mikael Pettersson
2001-09-26 23:08 ` Wayne Whitney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BB200C2.7D7E84B4@cistron.nl \
--to=munnikes@cistron.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.