From: Byron Albert <balbert@internet.com>
To: linux-kernel@vger.kernel.org
Subject: megaraid driver only seeing 2 of 3 logical dirve.
Date: Thu, 27 Sep 2001 13:56:31 -0400 [thread overview]
Message-ID: <3BB3684F.A4A4DB3C@internet.com> (raw)
I just added an ami megaraid card to a machine. I configured the 6 9gb
drives to look like 3 18gb drives and then booted. Linux only saw 2 of
the 3 drive. I think got the latest kernel and compiled and rebooted
and the same below is the relevant dmesg info. It says it detected 3
logical drives but the driver only uses two of them.
I really need this other drive so any help would be appreciated.
Byron
p.s. please cc me as I am in the proccess of joining the list
SCSI subsystem driver Revision: 1.00
megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 5:func 1
scsi0 : Found a MegaRAID controller at 0xf8808000, IRQ: 10
megaraid: [C :B ] detected 3 logical drives
megaraid: channel[1] is raid.
megaraid: channel[2] is raid.
megaraid: channel[3] is raid.
megaraid: no BIOS enabled.
scsi0 : AMI MegaRAID C 254 commands 16 targs 3 chans 8 luns
scsi0: scanning channel 1 for devices.
scsi0: scanning channel 2 for devices.
scsi0: scanning channel 3 for devices.
scsi0: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID0 17354R Rev: C
Type: Direct-Access ANSI SCSI revision: 02
Vendor: MegaRAID Model: LD1 RAID0 17354R Rev: C
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 3, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 3, id 0, lun 1
SCSI device sda: 35540992 512-byte hdwr sectors (18197 MB)
sda: sda1
SCSI device sdb: 35540992 512-byte hdwr sectors (18197 MB)
sdb: sdb1
next reply other threads:[~2001-09-27 17:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-27 17:56 Byron Albert [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-09-27 19:37 megaraid driver only seeing 2 of 3 logical dirve Atul Mukker.
2001-09-27 23:02 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BB3684F.A4A4DB3C@internet.com \
--to=balbert@internet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.