Cannot find map file.
Loaded 12 symbols from 2 modules.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.10-lsm (bishop@linux) (gcc version 2.95.3 20010315 (SuSE)) #1 Thu Oct 4 11:16:50 CEST 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e6c00 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000017ee0000 (usable)
<4> BIOS-e820: 0000000017ee0000 - 0000000017eefc00 (ACPI data)
<4> BIOS-e820: 0000000017eefc00 - 0000000017ef0000 (ACPI NVS)
<4> BIOS-e820: 0000000017ef0000 - 0000000017ef2000 (reserved)
<4> BIOS-e820: 0000000017ef2000 - 0000000017f80000 (usable)
<4> BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<4>On node 0 totalpages: 98176
<4>zone(0): 4096 pages.
<4>zone(1): 94080 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: BOOT_IMAGE=selinux ro root=304 BOOT_FILE=/boot/selinuz-2.4.10 idebus=66
<4>ide_setup: idebus=66
<6>Initializing CPU#0
<4>Detected 847.193 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1690.82 BogoMIPS
<4>Memory: 384428k/392704k available (992k kernel code, 7816k reserved, 274k data, 184k init, 0k highmem)
<6>Security Scaffold v1.0.0 initialized
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
<7>CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
<7>CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
<4>CPU: Intel Pentium III (Coppermine) stepping 06
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfd97e, last bus=5
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 2: assuming transparent
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 1: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0
<3>  got res[f0101000:f0101fff] for resource 0 of O2 Micro, Inc. OZ6933 Cardbus Controller
<3>  got res[f0102000:f0102fff] for resource 0 of O2 Micro, Inc. OZ6933 Cardbus Controller (#2)
<3>  got res[f0103000:f0103fff] for resource 0 of Texas Instruments PCI1225
<3>  got res[f0104000:f0104fff] for resource 0 of Texas Instruments PCI1225 (#2)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<4>AVC:  allocated 14760 bytes during initialization.
<6>SELinux:  module inserted
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>PCI: Found IRQ 9 for device 00:1f.6
<6>PCI: Sharing IRQ 9 with 00:1f.3
<6>PCI: Sharing IRQ 9 with 00:1f.5
<6>PCI: Sharing IRQ 9 with 02:0a.1
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=16
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 66MHz system bus speed for PIO modes
<4>PIIX4: IDE controller on PCI bus 00 dev f9
<4>PIIX4: chipset revision 3
<4>PIIX4: not 100%% native mode: will probe irqs later
<4>    ide0: BM-DMA at 0x18c0-0x18c7, BIOS settings: hda:DMA, hdb:pio
<4>    ide1: BM-DMA at 0x18c8-0x18cf, BIOS settings: hdc:DMA, hdd:pio
<4>hda: TOSHIBA MK2016GAP, ATA DISK drive
<4>hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(66)
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4
<4>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
<4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
<6>PCI: Found IRQ 9 for device 02:08.0
<6>eth0: OEM i82557/i82558 10/100 Ethernet, 00:E0:00:1C:3F:AD, IRQ 9.
<6>  Board assembly 000000-000, Physical connectors present: RJ45
<6>  Primary interface chip i82555 PHY #1.
<6>  General self-test: passed.
<6>  Serial sub-system self-test: passed.
<6>  Internal registers self-test: passed.
<6>  ROM checksum self-test: passed (0x04f4518b).
<6>eth1: OEM i82557/i82558 10/100 Ethernet, 00:00:0E:CD:4B:9C, IRQ 9.
<6>  Board assembly 524000-003, Physical connectors present: RJ45
<6>  Primary interface chip i82555 PHY #1.
<6>  General self-test: passed.
<6>  Serial sub-system self-test: passed.
<6>  Internal registers self-test: passed.
<6>  ROM checksum self-test: passed (0x04f4518b).
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 321M
<3>agpgart: agpgart: Detected an Intel i815, but could not find the secondary device. Assuming a non-integrated video card.
<6>agpgart: Detected Intel i815 chipset
<6>agpgart: AGP aperture is 64M @ 0xf4000000
<6>[drm] AGP 0.99 on Intel i815 @ 0xf4000000 64MB
<6>[drm] Initialized r128 2.1.6 20010405 on minor 0
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>security:  starting up (compiled Oct  2 2001)
<4>security:  loading policy configuration from /ss_policy
<4>security:  3 users, 5 roles, 332 types
<4>security:  29 classes, 54422 rules
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 0 exe=none
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 1 exe=none
<4>Freeing unused kernel memory: 184k freed
<4>
<4>avc:  denied  { execute } for  pid=11 exe=/sbin/init path=/etc/init.d/boot dev=03:04 ino=817634
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:etc_t
<4>   tclass=file
<4>
<4>avc:  denied  { execute_no_trans } for  pid=11 exe=/sbin/init path=/etc/init.d/boot dev=03:04 ino=817634
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:etc_t
<4>   tclass=file
<4>
<4>avc:  denied  { execute } for  pid=18 exe=/bin/bash path=/bin/mount dev=03:04 ino=212631
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:mount_exec_t
<4>   tclass=file
<4>
<4>avc:  denied  { execute_no_trans } for  pid=18 exe=/bin/bash path=/bin/mount dev=03:04 ino=212631
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:mount_exec_t
<4>   tclass=file
<4>
<4>avc:  denied  { mounton } for  pid=18 exe=/bin/mount path=/proc dev=03:04 ino=32705
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:file_t
<4>   tclass=dir
<4>
<4>avc:  denied  { mount } for  pid=18 exe=/bin/mount path=/proc dev=03:04 ino=32705
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:proc_t
<4>   tclass=filesystem
<4>
<4>avc:  denied  { mount } for  pid=19 exe=/bin/mount path=/dev/pts dev=03:04 ino=1569795
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:devpts_t
<4>   tclass=filesystem
<4>
<4>avc:  denied  { write } for  pid=11 exe=/bin/bash path=/sys/net/ipv4/tcp_ecn dev=00:02 ino=4251
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:sysctl_net_t
<4>   tclass=file
<4>
<4>avc:  denied  { setattr } for  pid=11 exe=/bin/bash path=/sys/net/ipv4/tcp_ecn dev=00:02 ino=4251
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:sysctl_net_t
<4>   tclass=file
<4>
<4>avc:  denied  { write } for  pid=11 exe=/bin/bash
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:sysctl_t
<4>   tclass=file
<6>Adding Swap: 393584k swap-space (priority -1)
<4>AVC: 18 messages suppressed.
<4>
<4>avc:  denied  { unlink } for  pid=45 exe=/usr/sbin/zic path=/etc/localtime dev=03:04 ino=1569851
<4>   scontext=system_u:system_r:init_t
<4>   tcontext=system_u:object_r:usr_t
<4>   tclass=file
<4>task_precondition:  assigning context system_u:system_r:init_t to pid 2 exe=none
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 3 exe=none
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 4 exe=none
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 5 exe=none
<4>task_precondition:  assigning context system_u:system_r:kernel_t to pid 6 exe=none
<4>task_precondition:  assigning context system_u:system_r:init_t to pid 9 exe=none
<6>Intel 810 + AC97 Audio, version 0.04, 10:30:06 Oct  4 2001
<6>PCI: Found IRQ 9 for device 00:1f.5
<6>PCI: Sharing IRQ 9 with 00:1f.3
<6>PCI: Sharing IRQ 9 with 00:1f.6
<6>PCI: Sharing IRQ 9 with 02:0a.1
<4>PCI: Setting latency timer of device 00:1f.5 to 64
<6>i810: Intel ICH2 found at IO 0x1880 and 0x1000, IRQ 9
<4>i810_audio: Audio Controller supports 6 channels.
<6>ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
<4>i810_audio: only 48Khz playback available.
<4>i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
<6>ac97_codec: AC97 Modem codec, id: 0x5349:0x4c27 (Unknown)
<4>i810_audio: only 48Khz playback available.
<4>i810_audio: AC'97 codec 1 Unable to map surround DAC's (or DAC's not present), total channels = 4
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.