Re: IRDA/IRCOMM on a TiBook patch

[Till Straumann <Till.Straumann@TU-Berlin.de>]

Michel Dänzer wrote:
>
> On Tue, 2001-10-16 at 12:47, Till Straumann wrote:
>
> > I (and I believe other people as well) had problems
> > setting up IRDA/IRCOMM on a TiBook / 2.4.12-benh and
> > older 2.4 series kernels [on powerpc].
> >
> > As far as I could find out there are several problems:
> >
> > 1) There seems to be a timing problem when opening
> >    the irda port which prevents it from being properly
> >    initialized.
> >
> >    When I run "irattach /dev/ttyS1 -s 1", my Nokia 8890
> >    is never discovered. However, when I issue a 'cat /dev/ttyS1',
> >    prior to starting irattach (i.e. by opening the device
> >    [and holding it open until irattach starts]),
> >    things are properly initialized
> >    and discovery works. Putting 'mdelay(100);' somewhere
> >    in macserial.c:rs_open() does the job. However, I have
> >    not yet figured out what exactly causes the problem.
> >    A user space work-around involves patching irattach.c
> >
> > 2) There is an endianness bug. A possible solution is attached.
>
> Your patch seems to be missing a bit (in qos.c IIRC) though.

What is it missing? Please, be a little bit more verbose :-)

>
> > 3) When applying 1) and 2), IRCOMM works provided that
> >    /proc/sys/net/irda/max_baud_rate is clamped to 57600.
> >    Apparently, there is another problem in 'macserial.c' where speeds
> >    higher than 57600 are treated especially.
>
> Have you managed to do anything 'real' yet? I tried your patch, and it
> does seem to improve things, irdadump seems to show data from my Palm,
> but I haven't succeeded to synchronize yet.
>

Sure - I can open a modem connection to my cellphone and issue any AT
command I want. However, I have to take care of all of the three issues
mentioned. (I.e. use patched irattach, use patched kernel and
echo 57600 > /proc/sys/net/irda/max_baud_rate).

-- Till

> --
> Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
> XFree86 and DRI project member   /  CS student, Free Software enthusiast

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/