From: Hans Reiser <reiser@namesys.com>
To: firetiger <firetiger977@163.com>
Cc: linux-kernel@vger.kernel.org,
"Vladimir V. Saveliev" <monstr@namesys.com>
Subject: Re: OOPS: reiserfs panic
Date: Fri, 02 Nov 2001 15:46:02 +0300 [thread overview]
Message-ID: <3BE2958A.2070306@namesys.com> (raw)
In-Reply-To: <PIEMJKECONGJHFMFKFLHEEAGCAAA.firetiger977@163.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=GB2312, Size: 8231 bytes --]
It is not a Linus kernel that RedHat gave you. Please try the latest
Linus kernel, and tell us if that works. I think it will. Please give us
info about exactly what kernel they shipped if you can.
Hans
firetiger wrote:
>The oops appears when i backup my system to a reiserfs filesystem.
>first report "zam-7001: io error in reiserfs_find_entry", then oops and
>the mounted reiserfs filesystem can't be unmounted, i feel this urly.
>
>I have test the disk with tools badblocks (options: -svw -c 320), no problem.
>
>
>System:
>=========
>
> CPU: Athlon 1.2G
> Motherboard: Abit KT7A-RAID(HPT370 not enabled)
> OS: Redhat 7.2
>
>
>kernel config:
>==============
>(Compiler: 2.96-98)
>
>#
># Automatically generated by make menuconfig: don't edit
>#
>CONFIG_X86=y
>CONFIG_ISA=y
>CONFIG_UID16=y
>
>#
># Code maturity level options
>#
>CONFIG_EXPERIMENTAL=y
>
>#
># Loadable module support
>#
>CONFIG_MODULES=y
>CONFIG_MODVERSIONS=y
>CONFIG_KMOD=y
>
>#
># Processor type and features
>#
>CONFIG_MK7=y
>CONFIG_X86_WP_WORKS_OK=y
>CONFIG_X86_INVLPG=y
>CONFIG_X86_CMPXCHG=y
>CONFIG_X86_XADD=y
>CONFIG_X86_BSWAP=y
>CONFIG_X86_POPAD_OK=y
>CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>CONFIG_X86_L1_CACHE_SHIFT=6
>CONFIG_X86_TSC=y
>CONFIG_X86_GOOD_APIC=y
>CONFIG_X86_USE_3DNOW=y
>CONFIG_X86_PGE=y
>CONFIG_X86_USE_PPRO_CHECKSUM=y
>CONFIG_NOHIGHMEM=y
>CONFIG_MTRR=y
>
>#
># General setup
>#
>CONFIG_NET=y
>CONFIG_PCI=y
>CONFIG_PCI_GOANY=y
>CONFIG_PCI_BIOS=y
>CONFIG_PCI_DIRECT=y
>CONFIG_PCI_NAMES=y
>CONFIG_SYSVIPC=y
>CONFIG_BSD_PROCESS_ACCT=y
>CONFIG_SYSCTL=y
>CONFIG_KCORE_ELF=y
>CONFIG_BINFMT_AOUT=y
>CONFIG_BINFMT_ELF=y
>CONFIG_BINFMT_MISC=y
>CONFIG_PM=y
>CONFIG_APM=y
>CONFIG_APM_RTC_IS_GMT=y
>CONFIG_APM_REAL_MODE_POWER_OFF=y
>
>#
># Memory Technology Devices (MTD)
>#
># CONFIG_MTD is not set
>
>#
># Parallel port support
>#
># CONFIG_PARPORT is not set
>
>#
># Plug and Play configuration
>#
>CONFIG_PNP=y
>CONFIG_ISAPNP=y
>
>#
># Block devices
>#
>CONFIG_BLK_DEV_FD=y
>CONFIG_BLK_DEV_LOOP=m
>CONFIG_BLK_DEV_NBD=m
>CONFIG_BLK_DEV_RAM=m
>CONFIG_BLK_DEV_RAM_SIZE=4096
>
>#
># Networking options
>#
>CONFIG_PACKET=y
>CONFIG_PACKET_MMAP=y
>CONFIG_NETFILTER=y
>CONFIG_UNIX=y
>CONFIG_INET=y
>CONFIG_IP_MULTICAST=y
>
>#
># IP: Netfilter Configuration
>#
>CONFIG_IP_NF_CONNTRACK=m
>CONFIG_IP_NF_FTP=m
>CONFIG_IP_NF_IPTABLES=m
>CONFIG_IP_NF_MATCH_LIMIT=m
>CONFIG_IP_NF_MATCH_MAC=m
>CONFIG_IP_NF_MATCH_MARK=m
>CONFIG_IP_NF_MATCH_MULTIPORT=m
>CONFIG_IP_NF_MATCH_TOS=m
>CONFIG_IP_NF_MATCH_TCPMSS=m
>CONFIG_IP_NF_MATCH_STATE=m
>CONFIG_IP_NF_MATCH_UNCLEAN=m
>CONFIG_IP_NF_MATCH_OWNER=m
>CONFIG_IP_NF_FILTER=m
>CONFIG_IP_NF_TARGET_REJECT=m
>CONFIG_IP_NF_TARGET_MIRROR=m
>CONFIG_IP_NF_NAT=m
>CONFIG_IP_NF_NAT_NEEDED=y
>CONFIG_IP_NF_TARGET_MASQUERADE=m
>CONFIG_IP_NF_TARGET_REDIRECT=m
>CONFIG_IP_NF_NAT_FTP=m
>CONFIG_IP_NF_MANGLE=m
>CONFIG_IP_NF_TARGET_TOS=m
>CONFIG_IP_NF_TARGET_MARK=m
>CONFIG_IP_NF_TARGET_LOG=m
>CONFIG_IP_NF_TARGET_TCPMSS=m
>
>#
># ATA/IDE/MFM/RLL support
>#
>CONFIG_IDE=y
>
>#
># IDE, ATA and ATAPI Block devices
>#
>CONFIG_BLK_DEV_IDE=y
>CONFIG_BLK_DEV_IDEDISK=y
>CONFIG_IDEDISK_MULTI_MODE=y
>CONFIG_BLK_DEV_IDECD=y
>CONFIG_BLK_DEV_CMD640=y
>CONFIG_BLK_DEV_RZ1000=y
>CONFIG_BLK_DEV_IDEPCI=y
>CONFIG_IDEPCI_SHARE_IRQ=y
>CONFIG_BLK_DEV_IDEDMA_PCI=y
>CONFIG_BLK_DEV_ADMA=y
>CONFIG_IDEDMA_PCI_AUTO=y
>CONFIG_BLK_DEV_IDEDMA=y
>CONFIG_BLK_DEV_VIA82CXXX=y
>CONFIG_IDEDMA_AUTO=y
>CONFIG_BLK_DEV_IDE_MODES=y
>
>
>#
># I2O device support
>#
>CONFIG_I2O=m
>CONFIG_I2O_PCI=m
>CONFIG_I2O_BLOCK=m
>CONFIG_I2O_LAN=m
>CONFIG_I2O_PROC=m
>
>#
># Network device support
>#
>CONFIG_NETDEVICES=y
>
>CONFIG_NET_ETHERNET=y
>CONFIG_NET_PCI=y
>CONFIG_EEPRO100=y
>CONFIG_PPP=m
>CONFIG_PPP_ASYNC=m
>CONFIG_PPP_SYNC_TTY=m
>CONFIG_PPP_DEFLATE=m
>CONFIG_PPP_BSDCOMP=m
>CONFIG_PPPOE=m
>CONFIG_SLIP=m
>CONFIG_SLIP_COMPRESSED=y
>CONFIG_SLIP_SMART=y
>CONFIG_SLIP_MODE_SLIP6=y
>
>
>#
># Character devices
>#
>CONFIG_VT=y
>CONFIG_VT_CONSOLE=y
>CONFIG_SERIAL=y
>CONFIG_SERIAL_CONSOLE=y
>CONFIG_UNIX98_PTYS=y
>CONFIG_UNIX98_PTY_COUNT=256
>
>#
># I2C support
>#
>CONFIG_I2C=m
>CONFIG_I2C_ALGOBIT=m
>CONFIG_I2C_ELV=m
>CONFIG_I2C_VELLEMAN=m
>CONFIG_I2C_ALGOPCF=m
>CONFIG_I2C_ELEKTOR=m
>CONFIG_I2C_CHARDEV=m
>CONFIG_I2C_PROC=m
>
>#
># Mice
>#
># CONFIG_BUSMOUSE is not set
>CONFIG_MOUSE=y
>CONFIG_PSMOUSE=y
>#
># Watchdog Cards
>#
>CONFIG_WATCHDOG=y
>CONFIG_SOFT_WATCHDOG=m
>CONFIG_WDT=m
>CONFIG_WDTPCI=m
>CONFIG_WDT_501=y
>CONFIG_WDT_501_FAN=y
>CONFIG_PCWATCHDOG=m
>CONFIG_ACQUIRE_WDT=m
>CONFIG_ADVANTECH_WDT=m
>CONFIG_IB700_WDT=m
>CONFIG_60XX_WDT=m
>CONFIG_W83877F_WDT=m
>CONFIG_MIXCOMWD=m
>CONFIG_I810_TCO=m
>CONFIG_MACHZ_WDT=m
>CONFIG_RTC=y
>CONFIG_AGP=m
>CONFIG_AGP_VIA=y
>CONFIG_DRM=y
>CONFIG_DRM_MGA=m
>
>#
># File systems
>#
># CONFIG_QUOTA is not set
># CONFIG_AUTOFS_FS is not set
>CONFIG_AUTOFS4_FS=y
>CONFIG_REISERFS_FS=y
>CONFIG_FAT_FS=m
>CONFIG_MSDOS_FS=m
>CONFIG_VFAT_FS=m
>CONFIG_TMPFS=y
>CONFIG_ISO9660_FS=y
>CONFIG_NTFS_FS=m
>CONFIG_PROC_FS=y
>CONFIG_DEVPTS_FS=y
>CONFIG_EXT2_FS=y
>CONFIG_UDF_FS=m
>
>#
># Network File Systems
>#
>CONFIG_NFS_FS=y
>CONFIG_NFSD=y
>CONFIG_SUNRPC=y
>CONFIG_LOCKD=y
>
>#
># Partition Types
>#
># CONFIG_PARTITION_ADVANCED is not set
>CONFIG_MSDOS_PARTITION=y
>CONFIG_NLS=y
>
>#
># Native Language Support
>#
>CONFIG_NLS_DEFAULT="iso8859-1"
>CONFIG_NLS_CODEPAGE_437=m
>CONFIG_NLS_CODEPAGE_936=m
>CONFIG_NLS_CODEPAGE_950=m
>CONFIG_NLS_CODEPAGE_932=m
>CONFIG_NLS_CODEPAGE_949=m
>CONFIG_NLS_CODEPAGE_1251=m
>CONFIG_NLS_ISO8859_1=m
>CONFIG_NLS_ISO8859_4=m
>CONFIG_NLS_UTF8=m
>
>#
># Console drivers
>#
>CONFIG_VGA_CONSOLE=y
>
>#
># Sound
>#
>CONFIG_SOUND=m
>CONFIG_SOUND_ES1371=m
>
>#
># USB support
>#
>CONFIG_USB=m
>CONFIG_USB_DEVICEFS=y
>CONFIG_USB_UHCI=m
>CONFIG_USB_UHCI_ALT=m
>CONFIG_USB_OHCI=m
>CONFIG_USB_HID=m
>CONFIG_USB_KBD=m
>CONFIG_USB_MOUSE=m
>CONFIG_USB_WACOM=m
>
>
>ksymoops output:
>================
>
>ksymoops 2.4.3 on i686 2.4.14-pre6. Options used
> -V (default)
> -k /proc/ksyms (default)
> -l /proc/modules (default)
> -o /lib/modules/2.4.14-pre6/ (default)
> -m /usr/src/linux-2.4.14/System.map (specified)
>
>invalid operand: 0000
>CPU: 0
>EIP: 0010:[<c017b239>] Not tainted
>Using defaults from ksymoops -t elf32-i386 -a i386
>EFLAGS: 00010296
>eax: 0000002d ebx: c02253e0 ecx: d7366000 edx: d7367f64
>esi: d6859600 edi: c322bef4 ebp: c322be5c esp: c322be38
>ds: 0018 es: 0018 ss: 0018
>Process cp (pid: 3739, stackpage=c322b000)
>Stack: c021b4b7 c02a1e40 c02253e0 c322be5c c322be5c c322beb4 c01707a3 d6859600
> c02253e0 00004c93 00004fb4 4604187f 000001f4 00000000 00000003 00000000
> d3e597c0 fffffff4 c322beb4 c322bef4 00000000 c01708ad cec4e500 d3b49b1c
>Call Trace: [<c01707a3>] [<c01708ad>] [<c0141212>] [<c0170840>] [<c013f687>]
> [<c0137b7e>] [<c013870a>] [<c0138dcd>] [<c0139162>] [<c0106ceb>]
>Code: 0f 0b 85 f6 68 40 1e 2a c0 74 0d 0f b7 46 08 50 e8 72 4d fb
>
>>>EIP; c017b238 <reiserfs_panic+28/60> <=====
>>>
>Trace; c01707a2 <reiserfs_find_entry+a2/140>
>Trace; c01708ac <reiserfs_lookup+6c/e0>
>Trace; c0141212 <iget4+b2/c0>
>Trace; c0170840 <reiserfs_lookup+0/e0>
>Trace; c013f686 <d_alloc+16/170>
>Trace; c0137b7e <cached_lookup+e/50>
>Trace; c013870a <lookup_hash+6a/90>
>Trace; c0138dcc <lookup_create+2c/70>
>Trace; c0139162 <sys_mkdir+52/d0>
>Trace; c0106cea <system_call+32/38>
>Code; c017b238 <reiserfs_panic+28/60>
>00000000 <_EIP>:
>Code; c017b238 <reiserfs_panic+28/60> <=====
> 0: 0f 0b ud2a <=====
>Code; c017b23a <reiserfs_panic+2a/60>
> 2: 85 f6 test %esi,%esi
>Code; c017b23c <reiserfs_panic+2c/60>
> 4: 68 40 1e 2a c0 push $0xc02a1e40
>Code; c017b240 <reiserfs_panic+30/60>
> 9: 74 0d je 18 <_EIP+0x18> c017b250 <reiserfs_panic+40/60>
>Code; c017b242 <reiserfs_panic+32/60>
> b: 0f b7 46 08 movzwl 0x8(%esi),%eax
>Code; c017b246 <reiserfs_panic+36/60>
> f: 50 push %eax
>Code; c017b248 <reiserfs_panic+38/60>
> 10: e8 72 4d fb 00 call fb4d87 <_EIP+0xfb4d87> c112ffbe <_end+e6f2e2/18573324>N§²æìr¸yúèØb²X¬¶Ç§vØ^?)Þº{.n?+·¥{±êçzX§¶\x17¡Ü¨}?²Æ z?&j:+v¨?\a«êçzZ+EUR?+zf£¢·h§~Ûi?ûàz?\x1e®w¥¢??¨è?&?)ߢ^[fù^jÇ«y§m
á@A«a¶Ú\x7f?\f0¶ìh?\x0fåi\x7f
>
next prev parent reply other threads:[~2001-11-02 12:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-02 3:18 OOPS: reiserfs panic firetiger
2001-11-02 12:46 ` Hans Reiser [this message]
2001-11-02 13:19 ` Rik van Riel
2001-11-02 13:19 ` Chris Mason
-- strict thread matches above, loose matches on Subject: below --
2001-11-02 14:45 ÍõÀèÃ÷
[not found] <3BE2A84C.E072AD98@namesys.com>
2001-11-03 18:20 ` firetiger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BE2958A.2070306@namesys.com \
--to=reiser@namesys.com \
--cc=firetiger977@163.com \
--cc=linux-kernel@vger.kernel.org \
--cc=monstr@namesys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.