From: Dan Malek <dan@embeddededge.com>
To: Sarnath Kannan <sparc64@rediffmail.com>
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: IDE in Mode 1 (Sandpoint) how ?
Date: Tue, 13 Nov 2001 00:25:44 -0500 [thread overview]
Message-ID: <3BF0AED8.1020503@embeddededge.com> (raw)
In-Reply-To: 20011113040707.18867.qmail@mailweb26.rediffmail.com
Sarnath Kannan wrote:
> ..... But whatss troubling
> my head is, the kernel boots up fine until the NFS mount.
> Had the switch settings been wrong, the serial output
> would be slow from early bootup, right ?
Nope. All of the kernel print out is polled I/O.
> ..... But thats
> not the case. Why should it be slow after INIT starts
> up ?
Because it uses interrupt driven serial I/O.
Believe me, all of us using Sandpoints have seen this before.
Your interrupt/arbitration routing switches on the board are wrong.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2001-11-13 5:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-13 4:07 Re: IDE in Mode 1 (Sandpoint) how ? Sarnath Kannan
2001-11-13 5:25 ` Dan Malek [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-11-13 8:17 Sarnath Kannan
2001-11-13 16:18 ` Dan Malek
2001-11-12 12:46 Sarnath Kannan
2001-11-12 16:09 ` Dan Malek
2001-11-12 19:55 ` Mark A. Greer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3BF0AED8.1020503@embeddededge.com \
--to=dan@embeddededge.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=sparc64@rediffmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.