All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Plattner <christoph.plattner@gmx.at>
To: Thomas Marteau <marteaut@esiee.fr>,
	"parisc-linux@lists.parisc-linux.org"
	<parisc-linux@lists.parisc-linux.org>
Subject: [parisc-linux] Re: E55 status
Date: Sun, 18 Nov 2001 03:24:44 +0100	[thread overview]
Message-ID: <3BF71BEC.5D032CE6@gmx.at> (raw)
In-Reply-To: 3BF4E38C.D59603FE@esiee.fr

Hi Thomas !

Here are the current status of the E55:

I have rewritten my whole stuff on the current CVS snapshot from the end
of this week (2.4.14-pa6).

(1) TTY driver for the PDC console, used in polling mode (30ms) as
device
	/dev/ttyB0:
	- only tested via serial line !
	- is configured together with CONFIG_SERIAL_CONSOLE, if ARCH is
		parisc (XXX: TODO a config via menu for PDC CONSOLE DRIVER)
	- a node (/dev/ttyB0 c 30 0) must be created
	- /etc/inittab should have a login on /dev/ttyB0
	- the kernel line parameter `console=ttyB0' must be set

	Driver works for complete Linux stuff, including `login' and editing
	on the `bash'.
	
(2) LED support for the "RUN" and "ATTENTION" LED (cuppled to the
heartbeat of
	700er machines. If the heartbeart is active, E55 shows "RUN", otherwise
	the machine indicates "ATTENTION"). So the status can be influenced
	by the `/proc/pdc/led' entry.
	This LED driver is activated by the model name "9000/856" (E55), so
	for further machines of similar types, the model names have to be
	added.

In general, the CONFIG stuff has to be adapted. On that stuff, my
experience 
is not that what other LINUX hacker's expect ...

Further, is there a developer ChangeLog file to do entries per file ?

So the E55 server can be booted diskless by BOOTP(DHCP)/TFTP and boots
up. Ethernet is full functioning, the console works on port 0 of the
8-port multiplexer. No SCSI controller is deteced, not the parallel
interface,
and the mulitplexer board. For these three componets, drivers are
needed,
and the DOCUMENTATION !!!

I hope, parts of my stuff (or all plus improvments concerning
configuration)
will come into the kernel main stream to have this "start" of E55 server
in the kernel.

I will add my current CVS diffings of my extensions very soon, at the
moment
the CVS server seems to be down ! (Please contact me, if you have
interest !)

With friendly regards
Christoph P.



Thomas Marteau wrote:
> 
> Hi Christoph,
> 
>         I am updating our list of working hardware. Could you tell me if you
> know something about the status of PA/Linux on E55?
> 
> Thanks for your answer, Thomas.
> ESIEE Team

-- 
-------------------------------------------------------
private:	christoph.plattner@gmx.at
company:	christoph.plattner@alcatel.at

  parent reply	other threads:[~2001-11-19 12:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-07-04 22:21 [parisc-linux] Changes in Puffin Hardware Database !! Christoph Plattner
     [not found] ` <3BF4E38C.D59603FE@esiee.fr>
2001-11-18  2:24   ` Christoph Plattner [this message]
2001-11-19 16:45     ` [parisc-linux] Re: E55 status Grant Grundler
2001-11-19 18:29     ` Ryan Bradetich
2001-11-19 22:42   ` Christoph Plattner
2001-11-19 23:04     ` [parisc-linux] Re: E55 status - ADDENDUM TO DRIVER Christoph Plattner
2001-11-19 23:24       ` Matthew Wilcox
2001-11-19 23:33     ` [parisc-linux] Re: E55 status Matthew Wilcox
2001-11-20  0:14       ` [parisc-linux] Re: E55 status - NEW CVS DIFF (DRIVER) Christoph Plattner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3BF71BEC.5D032CE6@gmx.at \
    --to=christoph.plattner@gmx.at \
    --cc=marteaut@esiee.fr \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.