From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C0BDBB4.68EB3E72@chinook.com> Date: Mon, 03 Dec 2001 15:08:20 -0500 From: Peter Desnoyers MIME-Version: 1.0 To: Andrew Dixon Cc: ppclist Subject: Re: programming ppcboot onto an sbc8260 with a vision ice References: <3C0BD4F1.DB6591F3@seranoa.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: You need to take the ELF file, ppcboot, and convert it into a .bin file using the vision ICE convert utility. The file format referred to as "BIN" in the visionICE documentation isn't a real binary image - it has a special header. Andrew Dixon wrote: > > Hi All, > > I'm trying to put ppcboot onto my sbc8260 board using a vision ice and I > was wondering if there is a preferred way to do this? I've compiled > ppcboot on a native gcc-2.95 with the commands: > > $make sbc8260_config > $make > > and I get a binary file ppcboot.bin. When I try to program the > ppcboot.bin onto the flash it complains that the format is not > recognized as mpc8260 code. > > Any ideas on what I'm doing wrong? > > Thanks, > Andy > -- ..................................................................... Peter Desnoyers (781) 457-1165 pdesnoyers@chinook.com Chinook Communications (617) 661-1979 pjd@fred.cambridge.ma.us 100 Hayden Ave, Lexington MA 02421 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/