From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C0CD3C6.ECB0E61B@laposte.net> Date: Tue, 04 Dec 2001 14:46:46 +0100 From: Phil MIME-Version: 1.0 To: Matt Porter Cc: Tom Rini , Simon Winwood , linuxppc-embedded@lists.linuxppc.org Subject: Re: More walnut boottime "fun" References: <20011127103042.A11612@cse.unsw.edu.au> <20011126221728.D13091@cpe-24-221-152-185.az.sprintbbd.net> <20011127050754.B15728@cx258813-a.chnd1.az.home.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I'am trying to boot the latest linuxppc_2_4_devel kernel version (2.4.27-pre2). I got it with the rsync access from Montavista. I build the kernel for my Walnut board using HHL2.0 toolchain (ppc-405-xxx) and i try to load it with the original bootloader (from ibm) Nothing appened after "Now booting the kernel". It seems it's a known problem. Thanks. -Phil Here is my boot console: -------------------------------- ENET Speed is 10 Mbs... HALF duplex connection Booting from [ENET] Ethernet ... Sending bootp request ... Loading file "pvillet/kernel/vmlinuz-target" ... Sending tftp boot request ... Transfer Complete ... Loaded successfully ... Entry point at 0x500000 ... loaded at: 00500000 0058388C relocated to: 00400000 0048388C board data at: 004807BC 004807FC relocated to: 0048077C 004807BC zimage at: 00405400 0047FF59 avail ram: 00484000 02000000 Linux/PPC load: root=/dev/nfs rw ip=auto Uncompressing Linux...done. Now booting the kernel ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/