From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C14F742.A922C291@allot.com> Date: Mon, 10 Dec 2001 19:56:18 +0200 From: Felix Radensky MIME-Version: 1.0 To: Tom Rini Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: ppc405_enet problems References: <3C14B86D.726DBDE6@allot.com> <20011210161702.GE22045@cpe-24-221-152-185.az.sprintbbd.net> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, Support for DP83846A is already present in drivers/net/ppc405_phy.c My guess is that phy reading fuctions are misbehaving, since i keep getting different values of Phy id on each boot. Felix. Tom Rini wrote: > On Mon, Dec 10, 2001 at 03:28:13PM +0200, Felix Radensky wrote: > > > > Hi, > > > > I'm trying to run the latest linuxppc_2_4_devel kernel on > > our custom 405GP based board. I get kernel panic when an > > attempt is made to probe for ethernet controller phy: > > > > Kernel panic: eth0: PHY id 0xfbc85c20 is not supported! > > > > The phy is National Semiconductor DP83846AVHG. > > It works fine with Monta Vista HHL 2.0 kernel. > > IIRC, the hhl 2.0 kernel assumes that you have a National Semiconductor > DP83843. I'm guessing the 83846 is similar enough such that it just > works. Take a look at drivers/net/ppc405_phy.c, and add in support for > your PHY (and please sumbit a patch to the list). > > -- > Tom Rini (TR1265) > http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/