From: pil@mailnet.de
To: linux-kernel@vger.kernel.org
Subject: HFS-Bug in 2.4.17
Date: Mon, 31 Dec 2001 14:48:38 +0100 [thread overview]
Message-ID: <3C306CB6.867B071@mailnet.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 354 bytes --]
Hi,
Here is the next one:
You can recreate the bug if you have a kernel with modules support for
hfs-format, mount a hfs formated floppy and try to move a directory into
another directory on that floppy. You'll get a segmentation fault and an
uninterruptible sleep for the mount PID.
You cannot use or unmount the drive again.
Regards
Wolfgang Pichler
[-- Attachment #2: report --]
[-- Type: text/plain, Size: 8327 bytes --]
syslog
Dec 31 11:33:12 pc kernel: invalid operand: 0000
Dec 31 11:33:12 pc kernel: CPU: 0
Dec 31 11:33:12 pc kernel: EIP: 0010:[<c88abfb4>] Not tainted
Dec 31 11:33:12 pc kernel: EFLAGS: 00010246
Dec 31 11:33:12 pc kernel: eax: 00000000 ebx: c18b6f40 ecx: c42faa00 edx: 00000001
Dec 31 11:33:12 pc kernel: esi: 00000002 edi: c42fa820 ebp: c42faa20 esp: c19c9ec4
Dec 31 11:33:12 pc kernel: ds: 0018 es: 0018 ss: 0018
Dec 31 11:33:12 pc kernel: Process mv (pid: 943, stackpage=c19c9000)
Dec 31 11:33:12 pc kernel: Stack: c18b5c5c ffffffea c2129a9c 00000000 00000001 00000000 c4
2faa00 c42fa200
Dec 31 11:33:12 pc kernel: 00000000 00005b0e 73081300 67657661 9e656d61 9ee8c19c 9a
20c19c a800c212
Dec 31 11:33:12 pc kernel: a859c42f e780c88a c013c6b0 c0137074 c2129a20 c18b6940 c1
8b5be0 c19c45e0
Dec 31 11:33:12 pc kernel: Call Trace: [d_instantiate+16/48] [vfs_rename_dir+1004/1204] [v
fs_rename+46/136] [sys_rename+402/544] [system_call+51/64]
Dec 31 11:33:12 pc kernel:
Dec 31 11:33:12 pc kernel: Code: 0f 0b ff 03 8b 53 08 66 c7 42 34 00 00 a1 30 a9 24 c0 89
42
cat /proc/version
Linux version 2.4.17 (root@pc) (gcc version 2.95.2 19991024 (release)) #1 Wed Dec 26 10:42:01 CET 2001
cat /proc/modules
hfs 73552 0 (autoclean)
vfat 9200 0 (autoclean)
fat 28928 0 (autoclean) [vfat]
floppy 45712 0 (autoclean)
snd-pcm-oss 18208 0 (unused)
snd-pcm-plugin 14000 0 [snd-pcm-oss]
snd-mixer-oss 4832 0 [snd-pcm-oss]
snd-card-via686a 7152 0
snd-pcm 29216 0 [snd-pcm-oss snd-pcm-plugin snd-card-via686a]
snd-timer 8192 0 [snd-pcm]
snd-ac97-codec 24320 0 [snd-card-via686a]
snd-mixer 22896 0 [snd-mixer-oss snd-ac97-codec]
snd-mpu401-uart 2320 0 [snd-card-via686a]
snd-rawmidi 9344 0 [snd-mpu401-uart]
snd-seq-device 3824 0 [snd-rawmidi]
snd 31568 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-via686a snd-pcm snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 3280 4 [snd]
ide-scsi 7472 0
loop 7808 0 (unused)
sr_mod 12032 0 (unused)
sg 23520 0 (unused)
scsi_mod 79072 3 [ide-scsi sr_mod sg]
su1 lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8501 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 32 set
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8501 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0 set
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e4000000-e7ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 14)
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Region 4: I/O ports at d000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d800 [size=32]
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo Super AC97/Audio] (rev 12)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
Subsystem: Allied Telesyn International: Unknown device 2503
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 min, 64 max, 32 set
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i7 (rev 5b) (prog-if 00 [VGA])
Subsystem: Trident Microsystems: Unknown device 8400
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [80] AGP version 1.0
Status: RQ=32 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 451.037
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips : 897.84
reply other threads:[~2001-12-31 13:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C306CB6.867B071@mailnet.de \
--to=pil@mailnet.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.