From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C35BA5F.B15DC07@chinook.com> Date: Fri, 04 Jan 2002 09:21:20 -0500 From: Peter Desnoyers MIME-Version: 1.0 To: Liu HongXun-a16975 Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Question on the pcmcia module for ppc References: <01139FC052A0D411900B00508B9535FC048B108F@ZCH07EXM04.corp.mot.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Liu HongXun-a16975 wrote: > > When I inserted ds.o, the driver tells me that "cs: socket 0 timed out during reset" > I looked through the source code and the debug info. > I found that a lot of the same messages as follows: > GetStatus(0) = 0x190 > ... > Such info come from m8xx_pcmcia.c/m8xx_get_status. It seems that someone > is not satisfied with the above return value and " get status " again and again. > Then it quit. To look at it a different way - the driver was unhappy with the value of the first inb() on an address in the card's I/O space. My first guess (been there myself) is that inb() and outb() aren't working to your card's I/O space. -- ..................................................................... Peter Desnoyers (781) 457-1165 pdesnoyers@chinook.com Chinook Communications (617) 661-1979 pjd@fred.cambridge.ma.us 100 Hayden Ave, Lexington MA 02421 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/