From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from amsfep14-int.chello.nl (amsfep14-int.chello.nl [213.46.243.21]) by dsl2.external.hp.com (Postfix) with ESMTP id 0E744482A for ; Mon, 14 Jan 2002 08:25:52 -0700 (MST) Message-ID: <3C434AFE.4060506@chello.nl> Date: Mon, 14 Jan 2002 22:17:50 +0100 From: Arjen Hommersom MIME-Version: 1.0 To: Thibaut VARENE Cc: parisc-linux Subject: Re: [parisc-linux] 0.9.3 on a graphics console References: Content-Type: text/plain; charset=us-ascii; format=flowed Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Thibaut VARENE wrote: > Hi, > > about your problem you might find answers there: > http://lists.parisc-linux.org/pipermail/parisc- > linux/2001-December/014912.html This person succeeded with a serial console. Any reports of people succeeding with a graphics console? > Could you please tell us what procedure you used to install (CD, > network...), what is you exact hardware configuration, what boot args > you exactly typed, and any further info you might think useful to add... I'm trying to do a network install. I installed bootpd on an Debian/i386 machine and i boot with > boot lan I chose not to interact with IPL, so it used default boot args. For hardware.. it's a C240 and sam reports a HP visualize FX2(4) as a graphics card that is connected to a VGA monitor which works ok in HP-UX. If you can tell me how to get more detailed hardware information in HP UX, i'll be happy to provide it. >> >> I'm trying to install 0.9.3 with a graphics console on a C240, but >> the system stops at: >> Branching the kernel entry point 0x00100000. >> >> I've seen reports of people succeeding it with a serial console. >> Before i try to find out how that works (i've never used a serial >> console before), i'm wondering if there will be a 0.9.4 in the near >> future that supports this setup. >> Arjen Hommersom