All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Plattner <christoph.plattner@gmx.at>
To: "Björn Bylander" <bjorn.bylander@telia.com>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Booting to ISL with Linux installed
Date: Sun, 20 Jan 2002 17:16:34 +0100	[thread overview]
Message-ID: <3C4AED62.F3914545@gmx.at> (raw)
In-Reply-To: DLEJJFGDAJICFFBHFNCDAEAPCEAA.bjorn.bylander@telia.com

The problem you have, is that you may have activated the `autoboot'
mode.
Try to interrupt the autoboot mode by pressing <ESC>. Then you can
disable
autoboot.

But this is not your major problem. The "ISL" prompt after booting a
LIF-IMAGE was a tool inside the LIF-IMAGE. The boot load PALO works
in a different way. PALO together with a recovery kernel is also in
a LIF-IMAGE but there are no tools, as you know from HP-UX to boot
a HP-UX kernel with the command "hpux" or "boot" and there are also
not tools like "IODC" or whatever they were called (I am no HP 
specialist, but I want to learn more and more ...).

So you need to have a LIF-IMAGE stored on a different place or
loaded from net including those HP-UX basic tools. Such a LIF
image canbe found on the HP-UX itself, called "uxbootlf" (AFAIK).

By the way: I am also interetsed in setting my 712/60 to serial 
console. But I heard, it is a problem to setup wrong values here,
as no device may fanctioning then. What have I to do, to restore
the machine to let's say "factory setups" ?

With friendly regards
Christoph


Björn Bylander wrote:
>
> Hello,
> 
> I recently acquired a HP 712/80 system. I've installed PA-RISC Linux 0.9.3 on it and it runs fine.
> I've got one problem though. I don't know how to get to ISL after I installed Linux.
> The reason I want to use ISL is that I want to (try) to make the machine use a serial console.
> Before I installed Linux the machine booted into ISL automatically as the HD was wiped (or at least not bootable) but if I try to boot to ISL now with 'boot pri isl' (from BOOT_ADMIN) I only get to the 'configuration mode' of PALO where you can enter the kernel and other boot stuff.
> 
> All in all, how can I get to the ISL> prompt so that I can use 'conspath 2/0/4.0x283'?
> 
> Thanks in advance,
> Björn Bylander
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

-- 
-------------------------------------------------------
private:	christoph.plattner@gmx.at
company:	christoph.plattner@alcatel.at

  parent reply	other threads:[~2002-01-20 16:16 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-20 13:10 [parisc-linux] Booting to ISL with Linux installed Björn Bylander
2002-01-20 13:48 ` [parisc-linux] partitioned md to enable root on raid Peter Mottram
2002-01-21 20:32   ` Grant Grundler
2002-01-21 23:13     ` Peter Mottram
2002-01-22  2:20       ` Grant Grundler
2002-01-22  2:33         ` Matthew Wilcox
2002-01-22  4:11           ` Grant Grundler
2002-01-22  4:08         ` Grant Grundler
2002-01-22  6:32         ` Martin K. Petersen
2002-01-20 16:16 ` Christoph Plattner [this message]
2002-01-20 23:05   ` [parisc-linux] Booting to ISL with Linux installed Björn Bylander
2002-01-21  3:02     ` Matt Taggart
2002-01-21  6:59       ` [parisc-linux] sti console (was: Booting to ISL with Linux installed) Kaj-Michael Lang
2002-01-21 17:34         ` Bdale Garbee
2002-01-21 21:40           ` Christoph Plattner
2002-01-21 21:26       ` [parisc-linux] Booting to ISL with Linux installed Christoph Plattner
2002-01-22  1:51         ` Grant Grundler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3C4AED62.F3914545@gmx.at \
    --to=christoph.plattner@gmx.at \
    --cc=bjorn.bylander@telia.com \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.