All of lore.kernel.org
 help / color / mirror / Atom feed
From: Armin <akuster@pacbell.net>
To: Stefan Roese <stefan.roese@esd-electronics.com>
Cc: "David Müller (ELSOFT AG)" <d.mueller@elsoft.ch>,
	linuxppc-embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: [PATCH] Several patches against linuxppc_devel-2.4.18-pre9
Date: Mon, 11 Feb 2002 11:34:05 +0000	[thread overview]
Message-ID: <3C67AC2D.3050005@pacbell.net> (raw)
In-Reply-To: EFEAIMDCOOOHIEPHDNFJCELKDKAA.stefan.roese@esd-electronics.com


Stefan Roese wrote:
> Armin and David,
>
>
>>The ethernet changes look fine.  there was on other change regarding
>>resetting the EMAC. The ethernet part can go in as is our we can wait
>>until tomorrow when I send in that change + multi emac irq fix.
>>
>
> I checked the EMAC/PHY patch on our board (CPCI-405 with Intel LXT971), and
> the driver seems to start without problems without ethernet cable connected,
> when the EMAC soft-reset command is removed from the init routine.
>
> With the soft-reset in init still implemented, "fec_enet_mdio_read()"
> returns with timeout, waiting for transfer to complete. The next soft-reset
> in open leads to the same problem (timeout in mdio_read()), but doesn't lead
> to a kernel panik.
>
> So Armin, could you please remove the soft-reset from init (if nobody
> objects, of cause).
>
> Best regards,
> Stefan Roese
>
>
>
>
>

Stefan, David & Andrew,

Thanks

I will remove the EMAC soft-reset.

--armin


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

      reply	other threads:[~2002-02-11 11:34 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-02-11 14:32 [PATCH] Several patches against linuxppc_devel-2.4.18-pre9 David Müller (ELSOFT AG)
2002-02-11  9:29 ` Armin
2002-02-11 18:10   ` Stefan Roese
2002-02-11 11:34     ` Armin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3C67AC2D.3050005@pacbell.net \
    --to=akuster@pacbell.net \
    --cc=d.mueller@elsoft.ch \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    --cc=stefan.roese@esd-electronics.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.