From: Jeff Garzik <jgarzik@mandrakesoft.com>
To: Go Taniguchi <go@turbolinux.co.jp>
Cc: linux-kernel@vger.kernel.org, deller@puffin.external.hp.com
Subject: Re: [PATCH] pcnet32 v1.27
Date: Tue, 12 Feb 2002 07:21:28 -0500 [thread overview]
Message-ID: <3C6908C8.DC09410C@mandrakesoft.com> (raw)
In-Reply-To: <20020212204514.69ea7d45.go@turbolinux.co.jp>
[-- Attachment #1: Type: text/plain, Size: 480 bytes --]
Nice work... but... can you please apply the attached patch, and then
send me a diff?
The reason, I have already sent the attached patch to Marcelo to include
in 2.4.18-pre10, and it conflicts with yours.
Also, please CC myself and Andrew Morton (akpm@zip.com.au) on network
driver patches.
Thanks,
Jeff
--
Jeff Garzik | "I went through my candy like hot oatmeal
Building 1024 | through an internally-buttered weasel."
MandrakeSoft | - goats.com
[-- Attachment #2: pcnet32.patch --]
[-- Type: text/plain, Size: 6149 bytes --]
--- /spare/vanilla/linux-2.4.18-pre9/drivers/net/pcnet32.c Tue Feb 5 23:23:13 2002
+++ linux_2_4/drivers/net/pcnet32.c Fri Feb 8 01:48:31 2002
@@ -72,15 +72,15 @@
static const int max_interrupt_work = 80;
static const int rx_copybreak = 200;
-#define PORT_AUI 0x00
-#define PORT_10BT 0x01
-#define PORT_GPSI 0x02
-#define PORT_MII 0x03
-
-#define PORT_PORTSEL 0x03
-#define PORT_ASEL 0x04
-#define PORT_100 0x40
-#define PORT_FD 0x80
+#define PCNET32_PORT_AUI 0x00
+#define PCNET32_PORT_10BT 0x01
+#define PCNET32_PORT_GPSI 0x02
+#define PCNET32_PORT_MII 0x03
+
+#define PCNET32_PORT_PORTSEL 0x03
+#define PCNET32_PORT_ASEL 0x04
+#define PCNET32_PORT_100 0x40
+#define PCNET32_PORT_FD 0x80
#define PCNET32_DMA_MASK 0xffffffff
@@ -89,22 +89,22 @@
* to internal options
*/
static unsigned char options_mapping[] = {
- PORT_ASEL, /* 0 Auto-select */
- PORT_AUI, /* 1 BNC/AUI */
- PORT_AUI, /* 2 AUI/BNC */
- PORT_ASEL, /* 3 not supported */
- PORT_10BT | PORT_FD, /* 4 10baseT-FD */
- PORT_ASEL, /* 5 not supported */
- PORT_ASEL, /* 6 not supported */
- PORT_ASEL, /* 7 not supported */
- PORT_ASEL, /* 8 not supported */
- PORT_MII, /* 9 MII 10baseT */
- PORT_MII | PORT_FD, /* 10 MII 10baseT-FD */
- PORT_MII, /* 11 MII (autosel) */
- PORT_10BT, /* 12 10BaseT */
- PORT_MII | PORT_100, /* 13 MII 100BaseTx */
- PORT_MII | PORT_100 | PORT_FD, /* 14 MII 100BaseTx-FD */
- PORT_ASEL /* 15 not supported */
+ PCNET32_PORT_ASEL, /* 0 Auto-select */
+ PCNET32_PORT_AUI, /* 1 BNC/AUI */
+ PCNET32_PORT_AUI, /* 2 AUI/BNC */
+ PCNET32_PORT_ASEL, /* 3 not supported */
+ PCNET32_PORT_10BT | PCNET32_PORT_FD, /* 4 10baseT-FD */
+ PCNET32_PORT_ASEL, /* 5 not supported */
+ PCNET32_PORT_ASEL, /* 6 not supported */
+ PCNET32_PORT_ASEL, /* 7 not supported */
+ PCNET32_PORT_ASEL, /* 8 not supported */
+ PCNET32_PORT_MII, /* 9 MII 10baseT */
+ PCNET32_PORT_MII | PCNET32_PORT_FD, /* 10 MII 10baseT-FD */
+ PCNET32_PORT_MII, /* 11 MII (autosel) */
+ PCNET32_PORT_10BT, /* 12 10BaseT */
+ PCNET32_PORT_MII | PCNET32_PORT_100, /* 13 MII 100BaseTx */
+ PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, /* 14 MII 100BaseTx-FD */
+ PCNET32_PORT_ASEL /* 15 not supported */
};
#define MAX_UNITS 8
@@ -725,15 +725,15 @@
lp->ltint = ltint;
lp->mii = mii;
if (options[card_idx] > sizeof (options_mapping))
- lp->options = PORT_ASEL;
+ lp->options = PCNET32_PORT_ASEL;
else
lp->options = options_mapping[options[card_idx]];
lp->mii_if.dev = dev;
lp->mii_if.mdio_read = mdio_read;
lp->mii_if.mdio_write = mdio_write;
- if (fdx && !(lp->options & PORT_ASEL) && full_duplex[card_idx])
- lp->options |= PORT_FD;
+ if (fdx && !(lp->options & PCNET32_PORT_ASEL) && full_duplex[card_idx])
+ lp->options |= PCNET32_PORT_FD;
if (a == NULL) {
printk(KERN_ERR "pcnet32: No access methods\n");
@@ -745,7 +745,7 @@
/* detect special T1/E1 WAN card by checking for MAC address */
if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 && dev->dev_addr[2] == 0x75)
- lp->options = PORT_FD | PORT_GPSI;
+ lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */
lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
@@ -846,16 +846,16 @@
/* set/reset autoselect bit */
val = lp->a.read_bcr (ioaddr, 2) & ~2;
- if (lp->options & PORT_ASEL)
+ if (lp->options & PCNET32_PORT_ASEL)
val |= 2;
lp->a.write_bcr (ioaddr, 2, val);
/* handle full duplex setting */
if (lp->mii_if.full_duplex) {
val = lp->a.read_bcr (ioaddr, 9) & ~3;
- if (lp->options & PORT_FD) {
+ if (lp->options & PCNET32_PORT_FD) {
val |= 1;
- if (lp->options == (PORT_FD | PORT_AUI))
+ if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI))
val |= 2;
}
lp->a.write_bcr (ioaddr, 9, val);
@@ -863,19 +863,19 @@
/* set/reset GPSI bit in test register */
val = lp->a.read_csr (ioaddr, 124) & ~0x10;
- if ((lp->options & PORT_PORTSEL) == PORT_GPSI)
+ if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI)
val |= 0x10;
lp->a.write_csr (ioaddr, 124, val);
- if (lp->mii && !(lp->options & PORT_ASEL)) {
+ if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
val = lp->a.read_bcr (ioaddr, 32) & ~0x38; /* disable Auto Negotiation, set 10Mpbs, HD */
- if (lp->options & PORT_FD)
+ if (lp->options & PCNET32_PORT_FD)
val |= 0x10;
- if (lp->options & PORT_100)
+ if (lp->options & PCNET32_PORT_100)
val |= 0x08;
lp->a.write_bcr (ioaddr, 32, val);
} else {
- if (lp->options & PORT_ASEL) { /* enable auto negotiate, setup, disable fd */
+ if (lp->options & PCNET32_PORT_ASEL) { /* enable auto negotiate, setup, disable fd */
val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
val |= 0x20;
lp->a.write_bcr(ioaddr, 32, val);
@@ -895,7 +895,7 @@
lp->a.write_csr (ioaddr, 5, val);
}
- lp->init_block.mode = le16_to_cpu((lp->options & PORT_PORTSEL) << 7);
+ lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
lp->init_block.filter[0] = 0x00000000;
lp->init_block.filter[1] = 0x00000000;
if (pcnet32_init_ring(dev))
@@ -1494,9 +1494,9 @@
if (dev->flags&IFF_PROMISC) {
/* Log any net taps. */
printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
- lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PORT_PORTSEL) << 7);
+ lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7);
} else {
- lp->init_block.mode = le16_to_cpu((lp->options & PORT_PORTSEL) << 7);
+ lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
pcnet32_load_multicast (dev);
}
next prev parent reply other threads:[~2002-02-12 12:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-12 11:45 [PATCH] pcnet32 v1.27 Go Taniguchi
2002-02-12 12:21 ` Jeff Garzik [this message]
2002-02-12 13:23 ` Go Taniguchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C6908C8.DC09410C@mandrakesoft.com \
--to=jgarzik@mandrakesoft.com \
--cc=deller@puffin.external.hp.com \
--cc=go@turbolinux.co.jp \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.