From: Pierre Rousselet <pierre.rousselet@wanadoo.fr>
To: lkml <linux-kernel@vger.kernel.org>
Subject: 2.5.6-pre3 boot hangs in ide probing
Date: Sat, 09 Mar 2002 09:12:04 +0100 [thread overview]
Message-ID: <3C89C3D4.3070004@wanadoo.fr> (raw)
The motherboard is abit BE6 (4 ide, piix and hpt366) with a pIII coppermine.
For reference below is dmesg with a booting 2.5.6-pre2.
booting 2.5.6-pre3 hangs at :
........
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4
/dev/ide/host3/bus0/target0/lun0:
........
with hdg=noprobe, and even after un-plugging hdg, 2.5.6-pre3 hangs at :
........
ide2 at 0xcc00-0xcc07,0xd002 on irq 11
ide3 at 0xd800-0xd807,0xdc02 on irq 11
blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff)
........
(2.5.6-pre2)# dmesg
........
Uniform Multi-Platform E-IDE driver ver.:7.0.0
ide: system bus speed 33MHz
PCI device 8086:7111: IDE controller on PCI slot 00:07.1
PCI device 8086:7111: chipset revision 1
PCI device 8086:7111: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
PCI device 1103:0004: onboard version of chipset, pin1=1 pin2=2
PCI device 1103:0004: IDE controller on PCI slot 00:13.0
PCI: Found IRQ 11 for device 00:13.0
PCI: Sharing IRQ 11 with 00:13.1
PCI device 1103:0004: chipset revision 1
PCI device 1103:0004: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
PCI device 1103:0004: IDE controller on PCI slot 00:13.1
PCI: Found IRQ 11 for device 00:13.1
PCI: Sharing IRQ 11 with 00:13.0
PCI device 1103:0004: chipset revision 1
PCI device 1103:0004: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio
hdc: SAMSUNG DVD-ROM SD-616F, ATAPI CD/DVD-ROM drive
hde: ST310212A, ATA DISK drive
hdg: SAMSUNG SV0322A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xcc00-0xcc07,0xd002 on irq 11
ide3 at 0xd800-0xd807,0xdc02 on irq 11
blk: queue c0255658, I/O limit 4095Mb (mask 0xffffffff)
hde: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66)
blk: queue c0255c50, I/O limit 4095Mb (mask 0xffffffff)
hdg: 6250608 sectors (3200 MB) w/478KiB Cache, CHS=11024/9/63, UDMA(33)
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4
/dev/ide/host3/bus0/target0/lun0: p1
.......
Pierre
--
------------------------------------------------
Pierre Rousselet <pierre.rousselet@wanadoo.fr>
------------------------------------------------
next reply other threads:[~2002-03-09 8:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-09 8:12 Pierre Rousselet [this message]
2002-03-09 13:10 ` 2.5.6-pre3 boot hangs in ide probing Martin Dalecki
2002-03-09 14:37 ` Pierre Rousselet
2002-03-09 20:58 ` Martin Dalecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C89C3D4.3070004@wanadoo.fr \
--to=pierre.rousselet@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.