From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3C94E3A8.9080301@embeddededge.com> Date: Sun, 17 Mar 2002 13:42:48 -0500 From: Dan Malek MIME-Version: 1.0 To: Michael Sokolov Cc: linux-galileo@source.mvista.com, linuxppc-dev@lists.linuxppc.org Subject: Re: [PATCH] My GT-64260 enhancements References: <0203171816.AA01595@ivan.Harhan.ORG> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Michael Sokolov wrote: > But if you don't specify the baud rate in any way, it'll default to 9600 except > on the EV-64260-BP. You haven't experienced enough of the universe :-). Most boards default to the setting provided by a boot rom. Many of the boards I have use 115200 to speed up the embedded boot process but still allow debug output. Maybe you guys working on these boards ought to discuss some common solution instead of trying to use the "last patch changes the default behavior" technique :-). > That option works of course. So, I don't see the problem. A default is specified and you can change it, just like lots of other configurations. -- Dan ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/