From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3CB6118E.3090406@mvista.com> Date: Thu, 11 Apr 2002 15:43:26 -0700 From: Matthew Locke MIME-Version: 1.0 To: andrew may Cc: Armin , John Tyner , linuxppc-embedded@lists.linuxppc.org Subject: Re: [PATCH] early serial init References: <3CB5A370.4080409@pacbell.net> <20020411153642.C18158@ecam.san.rr.com> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: andrew may wrote: >On Thu, Apr 11, 2002 at 02:53:36PM +0000, Armin wrote: > >>John Tyner wrote: >> >>>I remember seeing something awhile ago about early boots, but I didn't >>>think it was for Walnut. Where is it/would it be? >>> >>>On Thu, 11 Apr 2002, Armin wrote: >>> >>> >>>>John Tyner wrote: >>>> >> >>David G did something and he hit the head_4xx.S & ppc4xx_setup.c and a >>few header files imb405gp.h >> > >This patch is to remove the need for the BASE BAUD define. If we ever start >trying to get a single kernel to build for multiple 405 boards that run at >various clock rates it becomes helpful to calc the base baud for the serial >ports rather than forcing it at compile time. > This does not fit the current design goals of the 4xx port, so I hope there are better reasons for this patch. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/