Re: 2.5.8 IDE oops (TCQ breakage?)

[Martin Dalecki <dalecki@evision-ventures.com>]

Mikael Pettersson wrote:
> I have a 486 box which ran 2.5.7 fine, but 2.5.8 oopses during
> boot at the BUG_ON() in drivers/ide/ide-disk.c, line 360:
> 
> 	if (drive->using_tcq) {
> 		int tag = ide_get_tag(drive);
> 
> 		BUG_ON(drive->tcq->active_tag != -1);

OK it could be that the tca goesn't get allocated if there
was no chipset selected. Lets have a look...


> 
> Relevant .config is
> # CONFIG_PCI is not set
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> (That's it. No chipset support selected; neither I nor Linux
> has ever detected any known IDE chipset in this box...)
> 
> Why is drive->using_tcq non-zero when CONFIG_BLK_DEV_IDE_TCQ=n
> and the disk is an early/mid-90s 500MB WD drive?
> 
> /Mikael
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 



-- 
- phone: +49 214 8656 283
- job:   eVision-Ventures AG, LEV .de (MY OPINIONS ARE MY OWN!)
- langs: de_DE.ISO8859-1, en_US, pl_PL.ISO8859-2, last ressort: ru_RU.KOI8-R