From: Todd Poynor <tpoynor@mvista.com>
To: andrew may <acmay@acmay.homeip.net>
Cc: Venkatesh Ramamurthy <rpranesh@hotmail.com>,
mporter@mvista.com, frank_rowand@mvista.com,
linuxppc-embedded@lists.linuxppc.org
Subject: Re: Linux on 440GP Networking issues
Date: Wed, 01 May 2002 12:23:23 -0700 [thread overview]
Message-ID: <3CD040AB.5000702@mvista.com> (raw)
In-Reply-To: 20020501120137.B9360@ecam.san.rr.com
>>Yep, the kernel tries to setup the second controller. But there is someting
>>very strange. Eventhough there is no network cable connected to the second
>>ethernet port , the OCP ENET driver says that it is 10Mbps, Link up and half
>>duplex.
The above is the default provided when autonegotiation doesn't turn up
anything useful, at least for the AMD Am79C875* PHYs (see ibm_ocp_phy.c:
mii_parse_Am79C875_pcr), which probably isn't the way to go. And
handling of the "no link" case does seem to need some work.
Could verify whether the lockup is related to configuring 2 EMACs by a
hack to ppc405_enet_open to return -ENODEV if fep->emac_num > 0. If
that boots fine then see if ppc405_eth_mal_dump shows registers such as
EMAC0's TXCTP0R or RXCTP0R changing values after EMAC1 is configured.
If so, that FIXME in the ppc405_enet_open code probably needs revisiting.
--
Todd
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next parent reply other threads:[~2002-05-01 19:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <F45zrLCCtgx8VUkRacU000059cf@hotmail.com>
[not found] ` <20020501120137.B9360@ecam.san.rr.com>
2002-05-01 19:23 ` Todd Poynor [this message]
2002-05-02 0:24 ` Linux on 440GP Networking issues Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CD040AB.5000702@mvista.com \
--to=tpoynor@mvista.com \
--cc=acmay@acmay.homeip.net \
--cc=frank_rowand@mvista.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=mporter@mvista.com \
--cc=rpranesh@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.