From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eddie Johnson Subject: Suse Linux Professional 7.2 Date: Wed, 08 May 2002 15:53:41 -0400 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <3CD98245.EBDF5B6F@milleraa.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hi, I have set up a suse linux 7.2 professional on a HP netserver LC3 PII/450. The OS is on the raid channel 0. I also have a scsi drive attached on another channel. The drive has been formatted so I am trying to figure out how to get the OS to recognize the new drive using stored commands, utilities, or packages. The data will be on this drive while the database software will be installed on the raid. I know I need to have the scsi drive mounted, I know a filesystem needs to be on there and I know I have to get communication between the two channels. I have been at newsgroups, sites that are not working as it involves scsi hardware, checked the how-to and I still come away with nothing. I think if I did a reinstallation of the OS that the drive will show but I am not going to always have the opportunity to do this in the future so I need a direction to procedures that will allow me to do this. Thanks in advance, Ed Johnson