From: Miles Lane <miles@megapathdsl.net>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: Re: Rivafb not working properly in kernel 2.5.15.
Date: Sun, 12 May 2002 17:51:46 -0700 [thread overview]
Message-ID: <3CDF0E22.9020005@megapathdsl.net> (raw)
In-Reply-To: 3CDD34E4.4040803@megapathdsl.net
Hmm. I just realised may still not have given enough information.
Here is a bit more.
vendor_id
: AuthenticAMD
cpu family : 6
model
: 2
model name : AMD Athlon(tm) Processor
cpu MHz : 848.383
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller (rev 25)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at fc9ff000 (32-bit, prefetchable) [size=4K]
I/O ports at ffe4 [disabled] [size=4]
Capabilities: <available only to root>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fca00000-feafffff
Prefetchable memory behind bridge: e4800000-f48fffff
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
(rev 01)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
(rev 03) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at cb00 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Flags: medium devsel
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 10
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
00:0f.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
Subsystem: Adaptec: Unknown device 3869
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at f800 [disabled] [size=256]
Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <available only to root>
00:11.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 40, IRQ 11
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:11.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 40, IRQ 5
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:11.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 01)
(prog-if 20)
Subsystem: NEC Corporation: Unknown device 00e0
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at febfdf00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:12.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 07)
Subsystem: Creative Labs CT4831 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at ff80 [size=32]
Capabilities: <available only to root>
00:12.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at fff0 [size=8]
Capabilities: <available only to root>
00:13.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fc00 [size=128]
Memory at febfde80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <available only to root>
00:14.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
Flags: medium devsel
Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
00:14.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
Flags: medium devsel
Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
16-bit legacy interface ports at 0001
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: bandwidth@sourceforge.net
prev parent reply other threads:[~2002-05-13 0:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-11 15:12 Rivafb not working properly in kernel 2.5.15 Miles Lane
2002-05-11 15:50 ` Jeff Garzik
2002-05-12 8:02 ` Miles Lane
2002-05-12 17:34 ` Ani Joshi
2002-05-12 18:26 ` Miles Lane
2002-05-13 0:51 ` Miles Lane [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CDF0E22.9020005@megapathdsl.net \
--to=miles@megapathdsl.net \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.