From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Shirkey Subject: Re: status of usb audio driver Date: Thu, 13 Jun 2002 01:48:33 +0900 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D077B61.7030902@boosthardware.com> References: <3D06D91D.1080104@boosthardware.com> <3D07564B.4050908@boosthardware.com> <3D0760FC.5060906@boosthardware.com> <3D0772F1.6090009@boosthardware.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Cc: Takashi Iwai , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Patrick Shirkey wrote: > Patrick Shirkey wrote: > >> >> i have been testing the sound and I am getting playback although at >> this point I can get sound out of hw:2,0 and hw:2,2 they are both the >> left channels. The sound is scratchy but it is there :) >> > > The sound is actually coming through output 2 and 4 on the sound card > even though I'm using hw:2,0 or hw:2,2. > When I use the first two pcm devices the sound is sent through output 2 on the card and when I use the third the sound is sent through output 4. I have also tested capture and the card is not working with that yet. It will attempt to record for a few seconds but will not write to a file or produce any noise either with direct monitoring enabled or not. Also recording locks the mouse until either it has finished or is ctrl+c'd. -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/