From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Shirkey Subject: Re: status of usb audio driver Date: Thu, 13 Jun 2002 02:31:12 +0900 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D078560.4030707@boosthardware.com> References: <3D06D91D.1080104@boosthardware.com> <3D07564B.4050908@boosthardware.com> <3D0760FC.5060906@boosthardware.com> <3D0772F1.6090009@boosthardware.com> <3D077B61.7030902@boosthardware.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Takashi Iwai wrote: > At Thu, 13 Jun 2002 01:48:33 +0900, > Patrick Shirkey wrote: > >>Patrick Shirkey wrote: >> >>>Patrick Shirkey wrote: >>> >>> >>>>i have been testing the sound and I am getting playback although at >>>>this point I can get sound out of hw:2,0 and hw:2,2 they are both the >>>>left channels. The sound is scratchy but it is there :) >>>> >>> >>>The sound is actually coming through output 2 and 4 on the sound card >>>even though I'm using hw:2,0 or hw:2,2. >>> >> >>When I use the first two pcm devices the sound is sent through output 2 >>on the card and when I use the third the sound is sent through output 4. > > > i committed a minor change to cvs. > now endpoints will be shown in each proc file. > could you apply and send me the output of each proc file? > i'd like to know whether really endpoints are parsed correctly. > > From the looks of things they are not. ------ # cat /proc/asound/card2/stream0 M Audio USB AudioSport Quattro (tm) : USB Audio Playback: Format: S16_LE Channels: 2 Endpoint: 3 OUT Rates: 11025, 22050, 44100 Capture: Format: S16_LE Channels: 2 Endpoint: 5 IN Rates: 11025, 22050, 44100 # cat /proc/asound/card2/stream1 M Audio USB AudioSport Quattro (tm) : USB Audio #1 Playback: Format: S16_LE Channels: 2 Endpoint: 3 OUT Rates: 11025, 22050, 44100, 48000 Capture: Format: S16_LE Channels: 2 Endpoint: 5 IN Rates: 11025, 22050, 44100, 48000 # cat /proc/asound/card2/stream2 M Audio USB AudioSport Quattro (tm) : USB Audio #2 Playback: Format: S16_LE Channels: 2 Endpoint: 4 OUT Rates: 11025, 22050, 44100, 48000 Capture: Format: S16_LE Channels: 2 Endpoint: 6 IN Rates: 11025, 22050, 44100, 48000 ------ > >>I have also tested capture and the card is not working with that yet. >> >>It will attempt to record for a few seconds but will not write to a file >>or produce any noise either with direct monitoring enabled or not. Also >> recording locks the mouse until either it has finished or is ctrl+c'd. > > > hmm, this sounds bad. > i'm not sure whether this is a general capture problem on usb audio. > i'll borrow a usb mic tomorrow and test with it. > > > ciao, > > Takashi > > -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/