From: Johan Gill <johane@lysator.liu.se>
To: stas.orel@mailcity.com
Cc: linux-msdos@vger.kernel.org
Subject: Re: What's up with Space Quest 2?
Date: Wed, 12 Jun 2002 23:56:25 +0200 [thread overview]
Message-ID: <3D07C389.7080809@lysator.liu.se> (raw)
In-Reply-To: 3D078C5C.7070507@yahoo.com
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
Stas Sergeev wrote:
> How good is it without any patches?
> Does it work on dosemu-1.0.2.1?
> It seems to use DMA before crash,
> does it make sense if you disable
> sound in program's setup or apply
> the sound patch? Do you have
> $_sound=(on) ?
It also crashes on 1.1.3. I don't remember exactly what went wrong with
1.0.2.1 since it was a while ago.
If I disable sound I get pretty much the same result, see below.
/Johan Gill, johane@lysator.liu.se
[-- Attachment #2: boot.nosound --]
[-- Type: text/plain, Size: 5123 bytes --]
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/ega_graf.ovl'
MFS: no drive selected fn=23
MFS: Finished dos_fs_redirect
int 0x2f, ax=0x1123
Do INT0x2f: Using caller_function()
INT2F at fdc8:6ab2: AX=1116, BX=6a66, CX=0000, DX=0000, DS=0133, ES=0133
MFS: Entering dos_fs_redirect, FN=16
MFS: selecting drive fn=16 sda_cds=0x5320
MFS: selected drive 2: /home/johan/dosemu/msdos/
MFS: (mode = 0x0000)
MFS: (sft_open_mode = 0x0000)
MFS: Open existing file C:\SIERRA\SQ2\EGA_GRAF.OVL
MFS: dos_fs: build_ufs_path for DOS path 'C:\SIERRA\SQ2\EGA_GRAF.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path '\SIERRA\SQ2\EGA_GRAF.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos//sierra/sq2/ega_graf.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl'
MFS: find_file(/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl)
MFS: find file /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl
MFS: scan_dir(/home/johan/dosemu/msdos/sierra/sq2,ega_graf.ovl)
MFS: scan_dir gave ega_graf.ovl FALSE
MFS: find_file(): no match: /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl
MFS: find_file gave /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl 0
MFS: open failed: '/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl'
MFS: Finished dos_fs_redirect
Do INT0x21: Using caller_function()
INT21 (0) at 0861:6807: AX=3fe1, BX=ffff, CX=0250, DX=0000, DS=11e1, ES=1262
int 0x21, ax=0x3fe1
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5d64: AX=3e62, BX=ffff, CX=0250, DX=0000, DS=11e1, ES=1262
int 0x21, ax=0x3e62
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5ce3: AX=3d00, BX=0010, CX=0250, DX=00c5, DS=11d1, ES=1262
INT21: open file "IBM_OBJS.OVL"
int 0x21, ax=0x3d00
Do INT0x2f: Using caller_function()
INT2F at fdc8:ac10: AX=1123, BX=0003, CX=6a66, DX=00c5, DS=11d1, ES=0133
MFS: Entering dos_fs_redirect, FN=23
MFS: selecting drive fn=23 sda_cds=0x1526f
MFS: FNX=IBM_OBJS.OVL
MFS: dos_fs: build_ufs_path for DOS path 'IBM_OBJS.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path 'IBM_OBJS.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos/ibm_objs.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/ibm_objs.ovl'
MFS: no drive selected fn=23
MFS: Finished dos_fs_redirect
int 0x2f, ax=0x1123
Do INT0x2f: Using caller_function()
INT2F at fdc8:6ab2: AX=1116, BX=6a66, CX=0000, DX=0000, DS=0133, ES=0133
MFS: Entering dos_fs_redirect, FN=16
MFS: selecting drive fn=16 sda_cds=0x5320
MFS: selected drive 2: /home/johan/dosemu/msdos/
MFS: (mode = 0x0000)
MFS: (sft_open_mode = 0x0000)
MFS: Open existing file C:\SIERRA\SQ2\IBM_OBJS.OVL
MFS: dos_fs: build_ufs_path for DOS path 'C:\SIERRA\SQ2\IBM_OBJS.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path '\SIERRA\SQ2\IBM_OBJS.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos//sierra/sq2/ibm_objs.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl'
MFS: find_file(/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl)
MFS: find file /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl
MFS: scan_dir(/home/johan/dosemu/msdos/sierra/sq2,ibm_objs.ovl)
MFS: scan_dir gave ibm_objs.ovl FALSE
MFS: find_file(): no match: /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl
MFS: find_file gave /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl 0
MFS: open failed: '/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl'
MFS: Finished dos_fs_redirect
Do INT0x21: Using caller_function()
INT21 (0) at 0861:6807: AX=3f3c, BX=ffff, CX=0160, DX=0000, DS=123c, ES=1262
int 0x21, ax=0x3f3c
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5d64: AX=3e62, BX=ffff, CX=0160, DX=0000, DS=123c, ES=1262
int 0x21, ax=0x3e62
Doing REP insb(0) 1 bytes at 0x18f22, DF 0
DMA: Read 0 from Channel 0 Address (Byte 0)
Doing REP insb(0) 1 bytes at 0x18f23, DF 0
DMA: Read 0 from Channel 0 Address (Byte 1)
Doing REP insb(0x200) 1 bytes at 0x18f28, DF 0
PORTb: 200 not available for read
200 > ff
SIGILL while in vm86()
ERROR: unexpected CPU exception 0x06 err=0x00000000 cr2=00000000 while in vm86 (DOS)
ERROR: unexpected CPU exception 0x06 err=0x00000000 cr2=00000000 while in vm86 (DOS)
Program=sigsegv.c, Line=193
EIP: 0861:0000988d ESP: 1262:73735afb VFLAGS(b): 00000 00110010 10000010
EAX: 000040f8 EBX: 0000ffff ECX: 0000b900 EDX: 00000200 VFLAGS(h): 00003282
ESI: 00000008 EDI: 00006909 EBP: 00002868 DS: 1262 ES: 1262 FS: 0000 GS: 0000
FLAGS: SF IF RF VM VIF IOPL: 3
STACK: 00 00 00 00 00 00 00 00 00 00 -> 08 69 08 00 68 28 0b 5b ff ff
OPS : 38 6c c6 fe c6 00 18 0c 38 6c -> c6 fe c6 00 7e 81 9d a1 a1 9d
c6fec6 0861:988d mov dh,0xc6
Program=sigsegv.c, Line=200
EIP: 0861:0000988d ESP: 1262:73735afb VFLAGS(b): 00000 00110010 10000010
EAX: 000040f8 EBX: 0000ffff ECX: 0000b900 EDX: 00000200 VFLAGS(h): 00003282
ESI: 00000008 EDI: 00006909 EBP: 00002868 DS: 1262 ES: 1262 FS: 0000 GS: 0000
FLAGS: SF IF RF VM VIF IOPL: 3
STACK: 00 00 00 00 00 00 00 00 00 00 -> 08 69 08 00 68 28 0b 5b ff ff
OPS : 38 6c c6 fe c6 00 18 0c 38 6c -> c6 fe c6 00 7e 81 9d a1 a1 9d
c6fec6 0861:988d mov dh,0xc6
next prev parent reply other threads:[~2002-06-12 21:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-12 18:01 What's up with Space Quest 2? Stas Sergeev
2002-06-12 21:56 ` Johan Gill [this message]
2002-06-12 22:03 ` Hartmut Figge
-- strict thread matches above, loose matches on Subject: below --
2002-06-13 1:04 Stas Sergeev
2002-06-13 10:26 ` Johan Gill
2002-06-13 10:58 ` Johan Gill
2002-06-13 11:03 ` Bart Oldeman
2002-06-13 11:00 ` Bart Oldeman
2002-06-12 16:40 Johan Gill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D07C389.7080809@lysator.liu.se \
--to=johane@lysator.liu.se \
--cc=linux-msdos@vger.kernel.org \
--cc=stas.orel@mailcity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.