All of lore.kernel.org
 help / color / mirror / Atom feed
From: kwijibo@zianet.com
To: "HABBINGA,ERIK (HP-Loveland,ex1)" <erik_habbinga@hp.com>
Cc: "'linux-kernel@vger.kernel.org'" <linux-kernel@vger.kernel.org>
Subject: Re: poor nfs server performance with 2.4.19-preX kernels vs. 2.4.17. Due to XFS and VM?
Date: Mon, 17 Jun 2002 14:01:44 -0600	[thread overview]
Message-ID: <3D0E4028.10900@zianet.com> (raw)
In-Reply-To: F341E03C8ED6D311805E00902761278C0C35DF85@xfc04.fc.hp.com

Why not try another benchmark that you can post the
results from?  Like Bonnie++, Postmark, Iozone, etc.
These are the benchmarks I use for my NFS benchmarking.

Steve


HABBINGA,ERIK (HP-Loveland,ex1) wrote:

>Hi,
>   I'm working on improving NFS server performance.  I've been able to get
>satisfactory performance with the 2.4.17 kernel, NFSD BKL removal code, and
>3GB kernel address space patches.  However, when I try to migrate to the
>2.4.19-preX kernels, I get nothing but pain and suffering.  I'm not allowed
>to post SPEC numbers, so I'm showing percentages versus my highest
>performing test run.  I haven't had the opportunity to watch every test as
>it runs, but have seen the 2.4.19-preX kernel tests spend a lot of time in
>shrink_cache schedule() call right before the tests timeout.
>
>All of the tests were run on the following hardware:
>
>4 PIII Xeon processors
>6GB RAM
>SPEC SFS NFS test v3.0
>2 Gigabit network connections to SPEC clients
>many Fiber channel hard drives
>
>I tested the following kernels:
>
>2.4.17
>2.4.19-pre9
>2.4.19-pre10
>2.4.19-pre10aa2 (config'd to use 3GB kernel address space)
>
>I patch the kernel with a collection of the following patches:
>
>- nfsd_bkl_removal 022702:
>http://marc.theaimsgroup.com/?l=linux-nfs&m=101485118003322&w=2 (remove the
>BKL from the nfsd code, add TCP support to nfsd, clean up the RPC stack
>code)
>
>- nfsd_bkl_removal 020702:
>http://marc.theaimsgroup.com/?l=linux-nfs&m=100888008825015&w=2  (same
>intention as nfsd_bkl_removal 022702, but doesn't include the NFSD TCP code
>or RPC stack cleanup code)
>
>- 3GB kernel address space:
>http://www.kernel.org/pub/linux/kernel/people/andrea/kernels/v2.4/2.4.18pre7
>aa2/00_3.5G-address-space-4
>   http://www.linuxhq.com/kernel/v2.4/unofficial/patch200202/89.html (give
>the kernel 3GB of the virtual address space)
>
>- akpm_nuke_buffers:
>http://marc.theaimsgroup.com/?l=linux-kernel&m=102226904021069&w=2 (hunt
>down buffer_heads and kill them)
>
>- XFS taken from the XFS CVS tree
>(http://oss.sgi.com/cgi-bin/cvsweb.cgi/linux-2.4-xfs/) on Feb 7 2002, June 3
>2002, and June 11 2002.  2.4.19-pre10aa2 already includes XFS, but I don't
>know its vintage.
>
>The only modifications to any /proc tunables were to increase the UDP stack
>size (/proc/sys/net/core/rmem_[default|max]  to 512K
>
>
>And here are the results:
>
>2.4.17 nfsd_bkl_removal 022702, 3GB kernel address space, XFS 020702
>- baseline
>
>2.4.17 nfsd_bkl_removal 022702, XFS 020702
>- 50% of baseline
>
>2.4.19-pre9 nfsd_bkl_removal 022702, XFS 060302 
>- 0% of baseline, would not run
>
>2.4.19-pre10 xfs 020702
>- 45% of baseline, probably would have kept running, but I stopped the test
>after max throughput was reached so I could try another configuration
>
>2.4.19-pre10 xfs 061102
>- 20% of baseline before timeout, lots of processes stuck in shrink_cache
>schedule() call
>
>2.4.19-pre10 xfs 061102, akpm_nuke_buffers
>- 30% of baseline before timeout
>
>2.4.19-pre10 xfs 061102, nfsd_bkl_removal 020702, akpm_nuke_buffers
>- 10% of baseline before timeout
>
>2.4.19-pre10 xfs 061102, nfsd_bkl_removal 020702
>- 20% of baseline before timeout
>
>2.4.19-pre10aa2 (3GB kernel address space)
>- 10% of baseline before timeout
>
>2.4.19-pre10aa2 (3GB kernel address space), nfsd_bkl_removal 020702
>- wouldn't run
>
>Conclusions:
>- using the 3GB kernel address space substantially helps 2.4.17 nfsd
>performance
>- 2.4.19-pre10 with XFS from Feb 7, 2002 was the most stable of the
>2.4.19-preX runs
>
>I will be running 2.4.19-pre10 xfs 061102, 3GB kernel address space later
>today or tomorrow.
>
>I will try any patches, kernel CONFIG options, or  /proc values anyone might
>suggest to get the 2.4.19-preX kernel nfsd performance at or near the 2.4.17
>nfsd performance.
>
>Thanks,
>Erik
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
>
>
>  
>




      reply	other threads:[~2002-06-17 19:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-06-17 19:44 poor nfs server performance with 2.4.19-preX kernels vs. 2.4.17. Due to XFS and VM? HABBINGA,ERIK (HP-Loveland,ex1)
2002-06-17 20:01 ` kwijibo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D0E4028.10900@zianet.com \
    --to=kwijibo@zianet.com \
    --cc=erik_habbinga@hp.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.