From: Dieter Stueken <stueken@conterra.de>
To: linux-kernel@vger.kernel.org
Subject: Re: [FREEZE] 2.4.19-pre10 + Promise ATA100 tx2 ver 2.20
Date: Sun, 07 Jul 2002 21:44:20 +0200 [thread overview]
Message-ID: <3D289A14.29B713C5@conterra.de> (raw)
Jussi Laako wrote:
> No matter which one of the
> installations is booted, the system will lock up if the VIA controller is in
> use at the same time as the PDC. However, system seems to be stable (short
> test priod though) if only the PDC controller is in use. (I left the old
> drives attached to the VIA controller unmounted.)
>
> Does this problem sound similar to yours?
seems similar to my problem. If I connect large (75-120G) disks on
both PDC channels and run /sbin/badblocks in parallel (dd might do, too)
I get a kernel panic/freeze. I get it even with no disk on the onboard
controller. I can reproduce this on two different VIA boards with both,
a PDC20267 and a PDC20262, too. On a board with Ali chiset, however
no error occured during a short (5 minutes) test. On a board with an
Intel
chipset I got some "DMA timeout" after 3 hours, but may be this was
an unrelated problem.
Dieter.
next reply other threads:[~2002-07-07 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-07 19:44 Dieter Stueken [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-06-22 18:22 [FREEZE] 2.4.19-pre10 + Promise ATA100 tx2 ver 2.20 Fabio Massimo Di Nitto
2002-06-22 18:45 ` Måns Rullgård
2002-06-22 18:53 ` Fabio Massimo Di Nitto
2002-06-22 21:25 ` Måns Rullgård
2002-06-23 6:19 ` Fabio Massimo Di Nitto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D289A14.29B713C5@conterra.de \
--to=stueken@conterra.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.