From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Shirkey Subject: Re: quattro multi plugin. Date: Fri, 19 Jul 2002 22:56:15 +0900 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D381A7F.4090708@boosthardware.com> References: <3D37BBBA.7030308@boosthardware.com> <3D37D0FD.3090400@boosthardware.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Cc: alsa-devel@lists.sourceforge.net, jackit-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org This is wierd. Using the exact same commands I cannot get jackd to load now. The card still, ahem, works, cough, with a single pcm device. ---- jackd -v -d alsa -d q4 jackd 0.37.1 Copyright 2001-2002 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 1068 waiting for signals creating alsa driver ... q4|1024|2|48000|swmon ALSA: no playback configurations available ALSA: cannot configure capture channel cannot load driver module alsa jack main caught signal 15 ---- This is after a reboot due to jackd hanging the machine after accidentally loading the hw plugin after having semi success with the code below. Patrick Shirkey wrote: > Ah that should be.... > > ---- > pcm.quattro { > type multi; > > slaves.a.pcm "hw:2,0"; > slaves.a.channels 3; > > > bindings.0.slave a; > bindings.0.channel 0; > bindings.1.slave a; > bindings.1.channel 1; > bindings.2.slave a; > bindings.2.channel 2; > > } > > ctl.quattro { > type hw; > card 0; > } > > pcm.q4 { > type route; > slave.pcm "quattro"; > ttable.1.1 1; > ttable.2.2 1; > > } > > ctl.q4 { > type hw; > card 2; > } > ---- > > When I run jackd I get this output though: > > ---- > jackd -v -d alsa -d q4 > jackd 0.37.1 > Copyright 2001-2002 Paul Davis and others. > jackd comes with ABSOLUTELY NO WARRANTY > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details > > 611 waiting for signals > creating alsa driver ... q4|1024|2|48000|swmon > new client: alsa_pcm, id = 1 type 1 @ 0x8067930 fd = 14 > port alsa_pcm:in_1 buf shm key 0x164398c5 at offset 4096 bi = 0x8066d00 > registered port alsa_pcm:in_1, offset = 4096 > port alsa_pcm:in_2 buf shm key 0x164398c5 at offset 8192 bi = 0x8066d10 > registered port alsa_pcm:in_2, offset = 8192 > port alsa_pcm:in_3 buf shm key 0x164398c5 at offset 12288 bi = 0x8066d20 > registered port alsa_pcm:in_3, offset = 12288 > port alsa_pcm:in_4 buf shm key 0x164398c5 at offset 16384 bi = 0x8066d30 > registered port alsa_pcm:in_4, offset = 16384 > registered port alsa_pcm:out_1, offset = 0 > registered port alsa_pcm:out_2, offset = 0 > registered port alsa_pcm:out_3, offset = 0 > registered port alsa_pcm:out_4, offset = 0 > -- jack_rechain_graph(): > client alsa_pcm: inprocess client, execution_order=0. > ALSA: poll time out polled for 45558.694314 > driver wait function failed, exiting > telling signal thread that the engine is done > jack main caught signal 1 > ---- -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf