From: mds@paradyne.com (Mark D. Studebaker)
To: lm-sensors@vger.kernel.org
Subject: adm1024
Date: Thu, 19 May 2005 06:23:36 +0000 [thread overview]
Message-ID: <3D446B75.1E7FE233@paradyne.com> (raw)
In-Reply-To: <002a01c23476$84783190$0201d00a@hq.pc3.xstreamis.com>
so do you recommend that we add 1027 support to adm1024 or lm87, or make
a new driver?
> Roger Orchard wrote:
>
> we have a card with an adm1027 (this is one of the first R&D broads,
> with the chip on)
>
> the adm1024 driver thinks that the adm1027 is the adm1024.
>
> talking to "Analog Devices" they say that you should check:-
>
> I believe that you can look at the Revision Reg 0x3F
>
> If it has a value of 0x10 - 0x1F, then it is a 1024
> If it has a value of 0x60 - 0x6F, then it is a 1027
>
> Also, as further verification, there are registers in the 1024 that do
> not exist in the 1027 and visa versa.
>
> we have also been looking at the LM87 witch is almost the same chip
> but from "National Semiconductor"
>
> ------------------------------------------------------------------
> Roger
> Tut System (UK) Ltd
> +44 1865 78 45 60
next prev parent reply other threads:[~2005-05-19 6:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-19 6:23 adm1024 Roger Orchard
2005-05-19 6:23 ` Mark D. Studebaker [this message]
2006-02-22 10:39 ` [lm-sensors] ADM1024 Murray Blakeman
2006-02-24 21:52 ` Jim Cromie
2006-03-03 20:43 ` Steven A. DuChene
2006-03-05 20:53 ` Rudolf Marek
2007-01-22 13:22 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D446B75.1E7FE233@paradyne.com \
--to=mds@paradyne.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.