From: Kasper Dupont <kasperd@daimi.au.dk>
To: stas.orel@mailcity.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: [patch] vm86: Clear AC on INT
Date: Thu, 01 Aug 2002 14:19:08 +0200 [thread overview]
Message-ID: <3D49273C.B11C237D@daimi.au.dk> (raw)
In-Reply-To: 3D4419F5.3000104@yahoo.com
[-- Attachment #1: Type: text/plain, Size: 711 bytes --]
Stas Sergeev wrote:
>
> Hello.
>
> According to this:
> http://support.intel.com/design/intarch/techinfo/Pentium/instrefi.htm#89126
> AC flag is cleared by an INT
> instruction executed in real mode.
> The attached patch implements that
> functionality and solves some
> problems recently discussed in
> dosemu mailing list.
Finally I found the old test program I originally used to discover
the missing clear_IF bug. With small modifications it should be
able to verify the existence of this AC bug and that it has been
corrected. I'm going to try this asap.
--
Kasper Dupont -- der bruger for meget tid på usenet.
For sending spam use mailto:razrep@daimi.au.dk
or mailto:mcxumhvenwblvtl@skrammel.yaboo.dk
[-- Attachment #2: traptest.pas --]
[-- Type: text/plain, Size: 2558 bytes --]
Uses Dos;
Const Code: Array[0..79] Of Byte = (
$89,$e5,$50,$53,$06,$51,$fb,$f4,$cf,$90,$90,$90,$90,$90,$90,$90,
$fb,$f4,$89,$ec,$cf,$90,$90,$90,$90,$90,$90,$90,$90,$90,$90,$90,
$0e,$e8,$02,$00,$89,$ec,$cf,$90,$90,$90,$90,$90,$90,$90,$90,$90,
$cd,$01,$cd,$03,$cd,$08,$cc,$9d,$89,$ec,$cf,$90,$90,$90,$90,$90,
$9c,$fa,$89,$ec,$cf,$90,$90,$90,$90,$90,$90,$90,$90,$90,$90,$90
);
Const FV: Array[0..3] Of Word = ($7002,$7102,$7202,$7302);
Var Buffer: Array[0..40000] Of Char;
Var Index: Word;
Var I: Word;
Procedure BufWrite(S: String);
Var I: Byte;
Begin
For I:=1 To Length(S) Do Begin
Buffer[Index]:=S[I];
Inc(Index);
End;
End;
Procedure Hex(w : Word);
Const
HexKarakterer : Array [0..$F] Of Char =
'0123456789ABCDEF';
Begin
BufWrite(HexKarakterer[Hi(w) Shr 4]+
HexKarakterer[Hi(w) And $F]+
HexKarakterer[Lo(w) Shr 4]+
HexKarakterer[Lo(w) And $F]+
' ');
End;
Procedure MyInt1(Flags, CS, IP, AX, BX, CX, DX, SI, DI, DS, ES, BP: word);
Interrupt;
Begin
Hex(IP);
Hex(MemW[CS:IP]);
Hex(SPtr);
Hex(Flags);
BufWrite('Trace'#13#10);
End;
Procedure MyInt3(Flags, CS, IP, AX, BX, CX, DX, SI, DI, DS, ES, BP: word);
Interrupt;
Begin
Hex(IP);
Hex(MemW[CS:IP]);
Hex(SPtr);
Hex(Flags);
BufWrite('Break'#13#10);
End;
Procedure MyInt8(Flags, CS, IP, AX, BX, CX, DX, SI, DI, DS, ES, BP: word);
Interrupt;
Begin
Port[$20]:=$20;
Hex(IP);
Hex(MemW[CS:IP]);
Hex(SPtr);
Hex(Flags);
BufWrite('Timer'#13#10);
End;
Var S01,S03,S08,S18: Pointer;
Var X,Y,Z: Byte;
Var Regs: Registers;
Var T: Byte;
Begin
WriteLn('Waiting');
Index := 0;
T:=Mem[$40:$6C];
Repeat
InLine($F4);
Until Byte(Mem[$40:$6C]-T) > 42;
WriteLn('Runing tests');
GetIntVec($01,S01);
GetIntVec($03,S03);
GetIntVec($08,S08);
GetIntVec($18,S18);
SetIntVec($01,@MyInt1);
SetIntVec($03,@MyInt3);
SetIntVec($08,@MyInt8);
SetIntVec($18,@Code);
For X:=0 To 3 Do
For Y := 0 To 3 Do
For Z := 1 To 4 Do
Begin
BufWrite('Test'#13#10);
Regs.AX:=FV[X];
Regs.BX:=FV[Y];
Regs.CX:=Ofs(Code[Z*16]);
Regs.ES:=Seg(Code);
Regs.Flags:=$7202;
Intr($18,Regs);
End;
SetIntVec($01,S01);
SetIntVec($03,S03);
SetIntVec($08,S08);
SetIntVec($18,S18);
WriteLn('Printing results');
For I:=0 To Index-1 Do
Write(Buffer[I]);
WriteLn('All done.');
End.
\x1a
next prev parent reply other threads:[~2002-08-01 12:17 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-28 16:21 [patch] vm86: Clear AC on INT Stas Sergeev
2002-08-01 12:19 ` Kasper Dupont [this message]
2002-08-01 13:43 ` Kasper Dupont
2002-08-01 15:15 ` Richard B. Johnson
2002-08-01 15:49 ` Kasper Dupont
2002-08-01 16:52 ` Alan Cox
2002-08-01 15:55 ` Kasper Dupont
2002-08-01 17:28 ` Alan Cox
2002-08-01 16:21 ` Kasper Dupont
2002-08-01 16:40 ` Maciej W. Rozycki
2002-08-01 17:04 ` Kasper Dupont
2002-08-01 17:38 ` Richard B. Johnson
2002-08-01 17:48 ` Kasper Dupont
2002-08-01 17:47 ` Alan Cox
2002-08-01 16:33 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D49273C.B11C237D@daimi.au.dk \
--to=kasperd@daimi.au.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=stas.orel@mailcity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.