Tigon3 and jumbo frames

[kwijibo@zianet.com]

Does the new version of the tigon 3 (tg3) drivers support jumbo
frames?  I have 2.4.19 using the v0.99 driver and I can't for the life
of me get the card to work with the jumbo frames.  I have a switch
that supports jumbo frames and I also have like 3-4 other computers
attached to the switch that are using the e1000 drivers.  Between
the comps with the e1000 drivers I can transmit/receive jumbo
frames fine, but when I try to send/receive jumbo frames from the
computer with the tg3 to any computer with the e1000 drivers it fails.  
I can transmit/receive normal sized (1500 MTU) sized frames fine
with the tg3 however. All the NICS have the MTU size set to 9000
and I initiate the jumbo frames by 'ping -s 9000 192.168.1.1'.
By glancing at the code I can see defines for the jumbo frames at it
is defined to 9000.  I noticed in the changelog for 2.4.19 that there
were quite a few changes to this driver and I am just wondering
if somethin was possibly broken in the process.