From: Blaise <jblaiseg@bellsouth.net>
To: linux-kernel@vger.kernel.org
Subject: actiontec PCI call waiting modem not responding with kernels 2.4.7+, 2.4.6 is ok though..
Date: Sat, 10 Aug 2002 15:29:56 -0400 [thread overview]
Message-ID: <3D5569B4.4010500@bellsouth.net> (raw)
here we go..
1 Problem : Not able to init modem..
2 Desc : Worked fine till 2.4.7..
3 Keywords : PCI Modem
4 Kernel version
Working : Linux version 2.4.6 (root@core) (gcc version 2.95.3
20010315 (SuSE)) #1 Wed Jan 16 14:46:28 EST 2002
Not working: Linux version 2.4.7 (root@core) (gcc version 2.95.3
20010315 (SuSE)) #1 Wed Jan 16 14:46:28 EST 2002
5 Oops : No oops..
6 Recreatable error script : N/A
7.1 Environment :
output of ver_linux script
<snip>
Linux core 2.4.6 #1 Wed Jan 16 14:46:28 EST 2002 i586 unknown
Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.10.91.0.4
util-linux 2.11b
mount 2.11b
modutils 2.4.5
e2fsprogs 1.19
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.25
PPP 2.4.0
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1343073 May 11 2001
/lib/libc.so.6
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.04
Sh-utils 2.0
<snip>
7.2 CPU info : cat of /proc/cpuinfo
<snip>
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 501.151
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow
k6_mtrr
bogomips : 999.42
<snip>
7.3 module info : none
7.4 Loaded driver and hardware information
from 2.4.6 (working)
(/proc/ioports)
<snip>
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
6000-60ff : VIA Technologies, Inc. VT82C586B ACPI
c000-cfff : PCI Bus #01
d000-d00f : VIA Technologies, Inc. Bus Master IDE
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : VIA Technologies, Inc. UHCI USB
d800-d87f : 3Com Corporation 3cSOHO100-TX Hurricane
d800-d87f : 00:08.0
dc00-dcff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
dc00-dc07 : serial(set)
e000-e0ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
e400-e407 : Lucent Microelectronics Venus Modem (V90, 56KFlex)
<snip>
(/proc/iomem)
<snip>
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03feffff : System RAM
00100000-0023776f : Kernel code
00237770-002a571b : Kernel data
03ff0000-03ff07ff : ACPI Non-volatile Storage
03ff0800-03ffffff : ACPI Tables
e0000000-e3ffffff : VIA Technologies, Inc. VT82C597 [Apollo VP3]
e4000000-e5ffffff : PCI Bus #01
e4000000-e4ffffff : nVidia Corporation Riva TnT 128 [NV04]
e6000000-e6ffffff : PCI Bus #01
e6000000-e6ffffff : nVidia Corporation Riva TnT 128 [NV04]
e6000000-e6fbffff : vesafb
e8000000-e800007f : 3Com Corporation 3cSOHO100-TX Hurricane
e8001000-e80010ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
ffff0000-ffffffff : reserved
<snip>
from 2.4.7 (not working)
(/proc/ioports)
<snip>
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
6000-60ff : VIA Technologies, Inc. VT82C586B ACPI
c000-cfff : PCI Bus #01
d000-d00f : VIA Technologies, Inc. Bus Master IDE
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : VIA Technologies, Inc. UHCI USB
d800-d87f : 3Com Corporation 3cSOHO100-TX Hurricane
d800-d87f : 00:08.0
dc00-dcff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
dc00-dc07 : serial(auto)
e000-e0ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
e400-e407 : Lucent Microelectronics Venus Modem (V90, 56KFlex)
<snip>
(/proc/iomem)
<snip>
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03feffff : System RAM
00100000-00222993 : Kernel code
00222994-0028febb : Kernel data
03ff0000-03ff07ff : ACPI Non-volatile Storage
03ff0800-03ffffff : ACPI Tables
e0000000-e3ffffff : VIA Technologies, Inc. VT82C597 [Apollo VP3]
e4000000-e5ffffff : PCI Bus #01
e4000000-e4ffffff : nVidia Corporation Riva TnT 128 [NV04]
e6000000-e6ffffff : PCI Bus #01
e6000000-e6ffffff : nVidia Corporation Riva TnT 128 [NV04]
e6000000-e6fbffff : vesafb
e8000000-e800007f : 3Com Corporation 3cSOHO100-TX Hurricane
e8001000-e80010ff : Lucent Microelectronics Venus Modem (V90, 56KFlex)
ffff0000-ffffffff : reserved
<snip>
7.5 PCI information ('lspci -vvv' as root)
<snip>
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
[Apollo VP] (rev 47)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at d000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 Ethernet controller: 3Com Corporation 3cSOHO100-TX Hurricane
(rev 30)
Subsystem: 3Com Corporation 3cSOHO100-TX Hurricane
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=128]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at e7000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Communication controller: Lucent Microelectronics Venus Modem
(V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8001000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at dc00 [size=256]
Region 2: I/O ports at e000 [size=256]
Region 3: I/O ports at e400 [size=8]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT 128
[NV04] (rev 04) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems: Unknown device 5802
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
<snip>
7.6 SCSI/IDE info (cat /proc/ide/via)
<snip>
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.20
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
BM-DMA base: 0xd000
PCI clock: 33MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA UDMA DMA
Address Setup: 30ns 30ns 30ns 120ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 330ns
Data Recovery: 30ns 30ns 30ns 270ns
Cycle Time: 60ns 60ns 60ns 600ns
Transfer Rate: 33.0MB/s 33.0MB/s 33.0MB/s 3.3MB/s
<snip>
7.7 Other information that might be relevant to the problem
*shrug*
X.
Here are some logs that might come in handy..
A clipping from my /var/log/boot.msg
<snip>
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
<6>PCI: Found IRQ 11 for device 00:09.0
<6>ttyS04 at port 0xdc00 (irq = 11) is a 16550A
<snip>
With any kernel later than 2.4.6 this part will sometimes fail, either way
the modem still won't respond unless useing 2.4.6 or earlyer..
A clipping from my /var/log/messages
<snip>
Aug 26 15:39:30 core pppd[381]: Perms of /dev/ttyS0 are ok, no 'mesg n'
neccesary.
Aug 26 15:39:31 core wvdial[696]: WvDial: Internet dialer version 1.41
Aug 26 15:39:31 core wvdial[696]: Initializing modem.
Aug 26 15:39:31 core wvdial[696]: Sending: ATZ
Aug 26 15:39:31 core wvdial[696]: Sending: ATQ0
Aug 26 15:39:31 core wvdial[696]: Re-Sending: ATZ
Aug 26 15:39:31 core wvdial[696]: Modem not responding.
<snip>
this works with 2.4.6...
Please help me!!
next reply other threads:[~2002-08-10 19:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-10 19:29 Blaise [this message]
2002-08-11 5:31 ` actiontec PCI call waiting modem not responding with kernels 2.4.7+, 2.4.6 is ok though Steven Walter
2002-08-12 13:21 ` Dana Lacoste
2002-08-12 22:43 ` Steven Walter
2002-08-12 22:36 ` Blaise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D5569B4.4010500@bellsouth.net \
--to=jblaiseg@bellsouth.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.