From: andrea.parenti3@tin.it (Andrea Parenti)
To: lm-sensors@vger.kernel.org
Subject: What does this mean?
Date: Thu, 19 May 2005 06:23:37 +0000 [thread overview]
Message-ID: <3D627ED8.7080802@tin.it> (raw)
.../lm_sensors-2.6.4/prog/detect/sensors-detect
gives this result:
...
Probing for `Winbond W83697HF'
Trying address 0x0290... Success!
(confidence 8, driver `Unwritten (W83697HF)')
...
Does it mean that "there is no driver for the chip "Winbond w83697hf"??
But i read that the driver w83781d should fit.
If I do:
modprobe w83781d
I got "No sensors found!"
This is my "lsmod":
inux:/home/andrea # lsmod
Module Size Used by Tainted: P
w83781d 16672 0 (unused)
i2c-proc 6016 0 [w83781d]
pppoe 6752 1 (autoclean)
pppox 1064 1 (autoclean) [pppoe]
af_packet 11528 1 (autoclean)
ppp_generic 14984 3 (autoclean) [pppoe pppox]
slhc 4432 0 (autoclean) [ppp_generic]
snd-mixer-oss 11136 1 (autoclean)
agpgart 29664 3 (autoclean)
NVdriver 989760 10 (autoclean)
parport_pc 25448 1 (autoclean)
lp 5824 0 (autoclean)
parport 21856 1 (autoclean) [parport_pc lp]
snd-seq-midi 4480 0 (autoclean) (unused)
snd-emu10k1-synth 5504 0 (autoclean)
snd-emux-synth 28480 0 (autoclean) [snd-emu10k1-synth]
snd-seq-midi-emul 4560 0 (autoclean) [snd-emux-synth]
snd-seq-virmidi 3720 0 (autoclean) [snd-emux-synth]
snd-seq-oss 24128 0 (autoclean)
snd-seq-midi-event 2664 0 (autoclean) [snd-seq-midi
snd-seq-virmidi snd-seq-oss]
snd-seq 39596 2 (autoclean) [snd-seq-midi
snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-oss
snd-seq-midi-event]
snd-emu10k1 62820 1 [snd-emu10k1-synth]
snd-pcm 58528 0 [snd-emu10k1]
snd-timer 11456 0 [snd-seq snd-pcm]
snd-hwdep 4736 0 [snd-emu10k1]
snd-util-mem 1472 0 [snd-emux-synth snd-emu10k1]
snd-rawmidi 13536 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1]
ipv6 123424 -1 (autoclean)
snd-seq-device 4336 0 [snd-seq-midi snd-emu10k1-synth
snd-emux-synth snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi]
snd-ac97-codec 24196 0 [snd-emu10k1]
snd 31720 0 [snd-mixer-oss snd-seq-midi
snd-emu10k1-synth snd-emux-synth snd-seq-midi-emul snd-seq-virmidi
snd-seq-oss snd-seq-midi-event snd-seq snd-emu10k1 snd-pcm snd-timer
snd-hwdep snd-util-mem snd-rawmidi snd-seq-device snd-ac97-codec]
soundcore 3268 7 [snd]
isa-pnp 27816 0 (unused)
joydev 5728 0 (unused)
evdev 3904 0 (unused)
mousedev 3872 1
hid 17824 0 (unused)
input 3072 0 [joydev evdev mousedev hid]
st 25844 0 (autoclean) (unused)
sg 23620 0 (autoclean)
3c59x 25032 1
ipt_REJECT 2752 1 (autoclean)
ipt_LOG 3168 1 (autoclean)
iptable_nat 12756 0 (autoclean) (unused)
ip_conntrack 12652 1 (autoclean) [iptable_nat]
iptable_filter 1728 1 (autoclean)
ip_tables 10400 6 [ipt_REJECT ipt_LOG iptable_nat
iptable_filter]
i2c-isa 1220 0 (unused)
i2c-core 12320 0 [w83781d i2c-proc i2c-isa]
usb-uhci 20996 0 (unused)
usbcore 55136 1 [hid usb-uhci]
ide-scsi 7648 0
reiserfs 158816 1
linux:/home/andrea # sensors -s
No sensors found!
Any help appreciated!!
Motherboard: Epox 8KHA+
System: SuSE linux 8.0.
next reply other threads:[~2005-05-19 6:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-19 6:23 Andrea Parenti [this message]
2005-05-19 6:23 ` What does this mean? Mark D. Studebaker
-- strict thread matches above, loose matches on Subject: below --
2006-05-16 16:51 what " Steve Iribarne (GMail)
2006-05-16 17:38 ` Walter L. Wimer III
2006-05-16 17:42 ` Walter L. Wimer III
2006-05-16 18:04 ` Steve Iribarne (GMail)
2003-03-19 9:51 What does this mean ? Frederic Gobin
2003-03-19 11:05 ` Raymond Leach
2003-03-19 11:16 ` Frederic Gobin
2003-03-05 4:55 What does this mean? Michael Paul
2003-03-05 6:37 ` Paul Clements
2003-02-27 15:06 Raymond Leach
2003-02-27 15:48 ` Maciej Soltysiak
2003-03-05 17:02 ` Alexander W. Janssen
2002-12-06 18:04 Eric R. Benoit
2002-12-06 22:28 ` Alan Cox
2002-10-27 21:07 Michael Rosenthal
2002-07-08 13:30 Basil Chupin
2002-07-08 15:09 ` Oleg Drokin
2002-07-08 16:13 ` Basil Chupin
2002-07-08 16:27 ` Kuba Ober
2002-07-08 16:28 ` Kuba Ober
2002-07-12 5:48 ` Basil Chupin
2002-07-12 13:26 ` Valdis.Kletnieks
2002-07-13 9:59 ` Basil Chupin
2002-07-14 16:36 ` Valdis.Kletnieks
2002-07-15 13:27 ` Basil Chupin
2002-08-06 6:33 ` Basil Chupin
2002-07-08 18:27 ` Oleg Drokin
2002-07-12 5:52 ` Basil Chupin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D627ED8.7080802@tin.it \
--to=andrea.parenti3@tin.it \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.