All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steven Scholz <steven.scholz@imc-berlin.de>
To: Alex Zeffertt <ajz@cambridgebroadband.com>
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: PCMCIA on an MPC860
Date: Fri, 23 Aug 2002 10:09:36 +0200	[thread overview]
Message-ID: <3D65EDC0.E16387CD@imc-berlin.de> (raw)
In-Reply-To: 3D64DA41.3000104@cambridgebroadband.com


Alex,

actually I had the Card Service running on MPC855/860 systems with Ethernet,
WaveLAN and ATA Cards.

It's a while back so I try to remember realy hard now!

I had this problem too.

1.) Did you try another PC Card, i.e. ethernet?
2.) How are your settings for IDE in your kernel configuration?
3.) I think I remember that I had to change something about the request_irq /
request_8xxirq.
    I think the oops comes because the driver can't request the irq!!!

Could you please show us you're oops!?

Steven


Alex Zeffertt wrote:
>
> All,
>
> Has anybody had any luck getting PCMCIA to work on an MPC860?
>
> I have a custom MPC860 board, with a single PCMCIA socket connected to Slot B.  This is what I have
> so far done:
>
> 1.
> Downloaded pcmcia-cs-3.2.0.tar.gz
> 2.
> Added board specific definitions in modules/m8xx_pcmcia.c for
>                 hardware_enable()
>                 hardware_disable()
>                 voltage_set()
>                 socket_get()
> 3.
> Cross compiled for the 8xx.
> 4.
> In my kernel (linux-2.4.4-2001-11-24 from Denx) I added the following lines
>                 include/asm-ppc/<board>.h:
>                         /* define IO_BASE for pcmcia */
>                         #define _IO_BASE 0x80000000
>                         #define _IO_BASE_SIZE (1024*64)
>                 arch/ppc/mm/init.c:
>                         void __init MMU_init(void) {
>                         ...
>                         ioremap(_IO_BASE,_IO_BASE_SIZE);
>
>         ...as suggested by Magnus Damm in
>         http://lists.linuxppc.org/linuxppc-embedded/200005/msg00227.html
>
> HOWEVER,
>
> 5.      When I boot my board with a Flash card in the PCMCIA slot, and I run:
>         /etc/rc.d/rc.pcmcia start
>         I find that ide_cs.o causes an Oops when it calls ide_register().  "cardctl status"
>         and "cardctl ident" work though.
>
> Can anybody suggest what I'm doing wrong?
>
> Thanks in advance,
>
> Alex
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  reply	other threads:[~2002-08-23  8:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-08-22 12:34 PCMCIA on an MPC860 Alex Zeffertt
2002-08-23  8:09 ` Steven Scholz [this message]
2002-08-23  8:51   ` Alex Zeffertt
2002-08-23  9:07     ` Steven Scholz
2002-08-23  9:20     ` shaowei dai
2002-08-23  9:32       ` Alex Zeffertt
     [not found]     ` <20020823090906.3511611822@denx.denx.de>
2002-08-23  9:24       ` Alex Zeffertt
2002-08-23  9:32 ` Magnus Damm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D65EDC0.E16387CD@imc-berlin.de \
    --to=steven.scholz@imc-berlin.de \
    --cc=ajz@cambridgebroadband.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.