From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dc-mx14.cluster1.charter.net (dc-mx14.cluster1.charter.net [209.225.8.24]) by dsl2.external.hp.com (Postfix) with ESMTP id 6C16F483C for ; Fri, 30 Aug 2002 17:01:18 -0600 (MDT) Message-ID: <3D6FF936.6090703@charter.net> Date: Fri, 30 Aug 2002 19:01:10 -0400 From: "B. Douglas Hilton" MIME-Version: 1.0 To: Michael Madden , palinux , debian-hppa@lists.debian.org Subject: Re: [parisc-linux] Debian 3.0 on C200 References: <20020830222805.GA29652@maddentechnologies.com> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Hi, yes, I have it working with a Visualize-EG graphics card. It runs at 1024x768@8bpp using the framebuffer. Chances are that you have one of the Visualize-FX boards which is not yet supported. FYI, I am currently working on getting PCI Voodoo2 boards to work on hppa machines both in console and XFree86 2D mode. The kernel has an sst1 framebuffer option, and X can now use the V2 as a 2D card. This would be helpful as the HP graphics cards were pretty hi-tech, low-volume cards and moreover there are quite a lot of different models, while the Voodoo2 boards are fairly common and well-understood. Right now my C200 is offline as I am working on upgrading a Netwinder which I am passing along to an Arm-linux developer, but I hope to get some work done on this project later this weekend. Anyways, a Visualize-EG card is proven to work with a C200. - Doug Michael Madden wrote: > Hello: > > Has anyone gotten X to work with the Debian 3.0 port on a PA-RISC C200 machine? > I have a C200 that I've installed Debian 3.0 on, but I cannot get X setup > correctly. > > The hardware is: > Main memory size: 768 Mbytes > 1 Raven U 200 (9000/780/C200) processor > 2 16550A serial ports > 1 ethernet interface > eth0: Digital DS21143 Tulip rev 48 > PCI bus devices: > SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 4). > Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 48). > Display controller: PCI device 103c:1008 (Hewlett-Packard Company) (rev 2). > > > I am attaching my config and log files if it helps. > > Thanks in advance, > Michael > > ================================================================================ > > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only make changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Generic Video Card" > Driver "fbdev" > Option "UseFBDev" "true" > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > # > HorizSync > 30-100 > HorizSync 31.5, 48.5 > VertRefresh 50-160 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Generic Video Card" > Monitor "Generic Monitor" > DefaultDepth 8 > SubSection "Display" > Depth 1 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1280x1024" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > ### END DEBCONF SECTION > > ================================================================================ > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to XFree86@XFree86.Org and patches submitted > to fixes@XFree86.Org. Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs) > > XFree86 Version 4.1.0.1 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 21 December 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.16-64 parisc64 [ELF] > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 30 16:23:17 2002 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "Generic Video Card" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (**) |-->Input Device "Generic Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (++) using VT number 7 > > (WW) Cannot open APM > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:13:0: chip 1000,000f card 0000,0000 rev 04 class 01,00,00 hdr 00 > (II) PCI: 00:14:0: chip 1011,0019 card 103c,104f rev 30 class 02,00,00 hdr 00 > (II) PCI: 01:04:0: chip 103c,1008 card 0000,0000 rev 02 class 03,80,00 hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x00 (VGA_EN is cleared) > (II) Bus 1 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (--) PCI: (1:4:0) HP unknown chipset (0x1008) rev 2, Mem @ 0xf6000000/25, BIOS @ 0xf1e00000/21 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] > [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] > [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xf2fff000 - 0xf2fff07f (0x80) MX[B] > [1] -1 0 0xf2ffe000 - 0xf2ffefff (0x1000) MX[B] > [2] -1 0 0xf2ffd000 - 0xf2ffd0ff (0x100) MX[B] > [3] -1 0 0xf1e00000 - 0xf1ffffff (0x200000) MX[B](B) > [4] -1 0 0xf6000000 - 0xf7ffffff (0x2000000) MX[B](B) > [5] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B] > [6] -1 0 0x0000fe00 - 0x0000feff (0x100) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xf2fff000 - 0xf2fff07f (0x80) MX[B] > [1] -1 0 0xf2ffe000 - 0xf2ffefff (0x1000) MX[B] > [2] -1 0 0xf2ffd000 - 0xf2ffd0ff (0x100) MX[B] > [3] -1 0 0xf1e00000 - 0xf1ffffff (0x200000) MX[B](B) > [4] -1 0 0xf6000000 - 0xf7ffffff (0x2000000) MX[B](B) > [5] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B] > [6] -1 0 0x0000fe00 - 0x0000feff (0x100) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] > [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] > [2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] > [1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B] > [2] -1 0 0xf2fff000 - 0xf2fff07f (0x80) MX[B] > [3] -1 0 0xf2ffe000 - 0xf2ffefff (0x1000) MX[B] > [4] -1 0 0xf2ffd000 - 0xf2ffd0ff (0x100) MX[B] > [5] -1 0 0xf1e00000 - 0xf1ffffff (0x200000) MX[B](B) > [6] -1 0 0xf6000000 - 0xf7ffffff (0x2000000) MX[B](B) > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] > [9] -1 0 0x0000ff00 - 0x0000ff7f (0x80) IX[B] > [10] -1 0 0x0000fe00 - 0x0000feff (0x100) IX[B] > (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, > mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 > (II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v, > pm2, pm, 300sx, 500tx, mx, delta > S3VIdentify > (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325, > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > trio 3d/2x, 86C362, 86C368 > (II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326, > SIS300, SIS630, SIS540 > (II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4, > Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, > Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister, > TwisterK > (II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388, > cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, > tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, > providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, > cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, > cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee, > 3dfx Voodoo3, 3dfx Voodoo5 > (II) FBDev: driver for framebuffer: fbdev, afb > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI), > ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI Radeon VE (AGP) > (II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128, > imstt3d > (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic > (II) v4l driver for Video4Linux > S3VProbe begin > (EE) No devices detected. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to submit@bugs.debian.org. > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux >