From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Shirkey Subject: Re: usb quattro Date: Wed, 04 Sep 2002 23:51:25 +0900 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D761DED.2020108@boosthardware.com> References: <3D761979.5050707@boosthardware.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Takashi Iwai wrote: > At Wed, 04 Sep 2002 23:32:25 +0900, > Patrick Shirkey wrote: > >>I have just found that the quattro will not output an audible stream >>from the external input channels until it has been made to output a >>stream through the internal i/o first. >> >>This means that the direct monitor switch does not work until a file is >>played internally through the card. >> >>After that everything works as expected. >> >>Is this a fixable bug or should I make a note in the online docs about it? > > > could you check whether only hw_params() (prepare()) sets up enough, > or do you really need to feed data to the output? > I can, how should I go about doing so? > (although i'm not sure, too, what is missing there...) > > > Takashi > > -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== "Um...symbol_get and symbol_put... They're kindof like does anyone remember like get_symbol and put_symbol I think we used to have..." - Rusty Russell in his talk on the module subsystem ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390