All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Kerl <andreas.kerl@dts.de>
To: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.20-pre6
Date: Tue, 10 Sep 2002 23:39:01 +0200	[thread overview]
Message-ID: <3D7E6675.5080303@dts.de> (raw)

Hi,
same problem here.
Kernel crashes at boot:

.......
ICH3M: IDE Controller on PCI bus 0 dev f9
PCI: Device 00:1f.1 not available becaus of resource collisions
PCI: Assigned IRQ11 for device 00:1f.1
Unable to handle kernel NULL pointer dereference at virtual address 00000010

printing eip:
c025a902
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010 [<c025a902>] Not tainted
EFLAGS: 00010097
eax: 00000010  ebx: 0000000a  ecx: 00000010  edx: fffffffe
esi: c030cf23  edi: 00000000  ebp: c030d31f  esp: c161bea0
.....


it's a Compaq EVO N800c laptop with 845MP chipset.

with kernel 2.4.20-pre5 it boots but no chipset support(dma).
with kernel 2.4.20-pre1-ac1 no problems:


....
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Assigned IRQ 11 for device 00:1f.1
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25T060ATCS05-0, ATA DISK drive
hdc: DW-28E, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 117210240 sectors (60012 MB) w/1768KiB Cache, CHS=7752/240/63, 
UDMA(100)
....


#lspci -v
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host 
Bridge (rev 04)
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, fast devsel, latency 0
	Memory at 60000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] #09 [d104]
	Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge 
(rev 04) (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, fast devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 40300000-403fffff
	Prefetchable memory behind bridge: 48000000-4fffffff

00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42) 
(prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 40000000-402fffff

00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
	Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 
8a [Master SecP PriP])
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 01f0
	I/O ports at 03f4
	I/O ports at 0170
	I/O ports at 0374
	I/O ports at 4440 [size=16]
	Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio 
(rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 0, IRQ 5
	I/O ports at 4000 [size=256]
	I/O ports at 4400 [size=64]

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility 
M7 LW (prog-if 00 [VGA])
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, stepping, 66Mhz, medium devsel, latency 66, IRQ 11
	Memory at 48000000 (32-bit, prefetchable) [size=128M]
	I/O ports at 3000 [size=256]
	Memory at 40300000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2

02:04.0 Communication controller: Lucent Microelectronics LT WinModem 
(rev 02)
	Subsystem: AMBIT Microsystem Corp.: Unknown device 0450
	Flags: bus master, medium devsel, latency 66, IRQ 5
	Memory at 40200000 (32-bit, non-prefetchable) [size=256]
	I/O ports at 2440 [size=8]
	I/O ports at 2000 [size=256]
	Capabilities: [f8] Power Management version 2

02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus 
Controller (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	16-bit legacy interface ports at 0001

02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset 
Ethernet Controller (rev 42)
	Subsystem: Compaq Computer Corporation: Unknown device 0093
	Flags: bus master, medium devsel, latency 66, IRQ 10
	Memory at 40080000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 2400 [size=64]
	Capabilities: [dc] Power Management version 2

02:0e.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 40, IRQ 10
	Memory at 40100000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2

02:0e.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 40, IRQ 10
	Memory at 40180000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [40] Power Management version 2

02:0e.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Compaq Computer Corporation: Unknown device 004a
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at 40280000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2





cu
Andreas


             reply	other threads:[~2002-09-10 21:34 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-09-10 21:39 Andreas Kerl [this message]
2002-09-10 22:26 ` Linux 2.4.20-pre6 Alan Cox
  -- strict thread matches above, loose matches on Subject: below --
2002-09-10 23:14 Jean Tourrilhes
2002-09-11  0:41 ` Alan Cox
2002-09-11  0:40   ` Jean Tourrilhes
2002-09-10 21:12 Tony Spinillo
2002-09-10 20:02 Koos Vriezen
2002-09-10 18:04 Marcelo Tosatti
2002-09-10 22:40 ` Adrian Bunk
2002-09-10 23:01   ` Alan Cox
2002-09-10 23:56 ` Adrian Bunk
2002-09-11 10:55   ` Geert Uytterhoeven
2002-09-11 10:55     ` Geert Uytterhoeven
2002-09-11 12:49     ` Joachim Breuer
2002-09-11 12:49       ` Joachim Breuer
2002-09-11 19:02       ` Thunder from the hill
2002-09-12 13:27     ` Geert Uytterhoeven
2002-09-12 13:27       ` Geert Uytterhoeven
2002-09-11 10:00 ` Oleg Drokin
2002-09-11 10:14   ` Andi Kleen
2002-09-11 10:36     ` Oleg Drokin
2002-09-11 10:51       ` Andi Kleen
2002-09-11 10:59         ` Oleg Drokin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D7E6675.5080303@dts.de \
    --to=andreas.kerl@dts.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.