From: Jeff Garzik <jgarzik@mandrakesoft.com>
To: Bastien Nocera <hadess@hadess.net>
Cc: "linuxppc-dev@lists.linuxppc.org" <linuxppc-dev@lists.linuxppc.org>
Subject: Re: mii-tool support for gmac/sungem
Date: Sun, 22 Sep 2002 23:22:07 -0400 [thread overview]
Message-ID: <3D8E88DF.2000900@mandrakesoft.com> (raw)
In-Reply-To: 1032740384.13093.199.camel@dozo
Bastien Nocera wrote:
> Hello,
>
> I wanted to know if mii-tool was supposed to work with the gmac/sungem
> card in the iBook2 laptops. I tried it out:
>
> $ sudo mii-tool
> SIOCGMIIPHY on 'eth0' failed: Operation not supported
> SIOCGMIIPHY on 'eth1' failed: Operation not supported
> no MII interfaces found
>
> I see code for this ioctl in the kernel though in gem_ioctl
> (drivers/net/sungem.c) and some messages that seem relevant in dmesg:
>
> eth0: MII PHY ID: 4061e0 BCM 5221
> eth0: switching to forced 100bt
> eth0: switching to forced 10bt
> etc.
>
> Any ideas ?
use ethtool...
Jeff
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2002-09-23 3:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-23 0:19 mii-tool support for gmac/sungem Bastien Nocera
2002-09-23 3:22 ` Jeff Garzik [this message]
2002-09-23 9:09 ` Bastien Nocera
2002-09-22 21:57 ` Benjamin Herrenschmidt
2002-09-23 9:48 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D8E88DF.2000900@mandrakesoft.com \
--to=jgarzik@mandrakesoft.com \
--cc=hadess@hadess.net \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.