sscape_ioctl.h not found!

sscape_ioctl.h not found!

[Emmanuel Fleury]

Hi,

I get the last CVS snapshot (from today) of alsa-driver
and I try to compile it on my new machine with a 2.4.19
kernel.

At the beginning, I had hard to figure out that the
directory alsa-kernel was missing.

Ok, I get it from the rc3 release.

Then, I tried the following command line:
./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes 
-with-isapnp=no --with-debug=none

But then, during the dependencies building, I get:

gcc -M -D__KERNEL__ -DMODULE=1 
-I/home/fleury/install/src/alsa-driver/include 
-I/lib/modules/2.4.19custom/build/include -O2 
-mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall 
-Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD  als100.c 
azt2320.c cmi8330.c dt019x.c es18xx.c opl3sa2.c sgalaxy.c sscape.c > .depend
sscape.c:41: sound/sscape_ioctl.h: No such file or directory
make[1]: *** [fastdep] Error 1
make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
make: *** [dep] Error 1

Actually, I didn't find any sound/sscape_ioctl.h anywhere... :-/

Did I miss something ?

Regards
-- 
Emmanuel

Most of my cliches aren't original.
   -- Chuck Knox, NFL football coach



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: sscape_ioctl.h not found!

[Martin Langer]

On Mon, Sep 23, 2002 at 07:05:54PM +0200, Emmanuel Fleury wrote:
> Hi,
> 
> I get the last CVS snapshot (from today) of alsa-driver
> and I try to compile it on my new machine with a 2.4.19
> kernel.
> 
> At the beginning, I had hard to figure out that the
> directory alsa-kernel was missing.
> 
> Ok, I get it from the rc3 release.
> 
> Then, I tried the following command line:
> ./cvscompile --with-cards=cmipci --with-sequencer=yes --with-oss=yes 
> -with-isapnp=no --with-debug=none
> 
> But then, during the dependencies building, I get:
> 
> gcc -M -D__KERNEL__ -DMODULE=1 
> -I/home/fleury/install/src/alsa-driver/include 
> -I/lib/modules/2.4.19custom/build/include -O2 
> -mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall 
> -Wstrict-prototypes -fomit-frame-pointer -pipe -DALSA_BUILD  als100.c 
> azt2320.c cmi8330.c dt019x.c es18xx.c opl3sa2.c sgalaxy.c sscape.c > .depend
> sscape.c:41: sound/sscape_ioctl.h: No such file or directory
> make[1]: *** [fastdep] Error 1
> make[1]: Leaving directory `/home/fleury/install/src/alsa-driver/isa'
> make: *** [dep] Error 1
> 
> Actually, I didn't find any sound/sscape_ioctl.h anywhere... :-/
> 

The file sscape_ioctl.h is in alsa-kernel/include/ and I can get it via CVS
update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad
choice. Try to use a clean cvs or a clean rc3 tree instead. 


martin


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: sscape_ioctl.h not found!

[Emmanuel Fleury]

Martin Langer wrote:
> 
> The file sscape_ioctl.h is in alsa-kernel/include/ and I can get it via CVS
> update. Is it fixed in the meantime? Your mix of cvs and rc3 is a bad
> choice. Try to use a clean cvs or a clean rc3 tree instead. 

Ok, so it was my fault. I shouldn't have mixed the alsa-kernel from
the 0.9.0rc3 and the CVS.

Actually, now I have figured out that alsa-kernel is an independant
module in the CVS archive... :-/

I didn't read the documentation enough.

Sorry.
-- 
Emmanuel

I always pass on good advice. It is the only thing to do with it.
It is never of any use to oneself.
   -- Oscar Wilde



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf