From mboxrd@z Thu Jan 1 00:00:00 1970 From: Weijia Yang Subject: Re: cs46xx experimental DSP drivers Date: Tue, 24 Sep 2002 21:45:52 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D911550.1000309@prism.gatech.edu> References: <3D8F7F59.6030105@prism.gatech.edu> <3D90A8D8.7070103@cucumelo.org> <3D90B54F.20402@prism.gatech.edu> <3D90D641.7050200@cucumelo.org> <3D90FEF4.2040309@prism.gatech.edu> <20020925010013.GC990@porky> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Peter Heatwole Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org > > You probably just stuck a define in cs46xx_lib.c. Append the > following into alsa-driver/pci/cs46xx/Makefile, to the end of the > EXTRA_FLAGS line: > > -DCONFIG_SND_CS46XX_DEBUG_GPIO=1 > > > HTH, > -- Peter Heatwole > "Murphy was just a well known pessimist." > > Thanks for the tip--everything compiles fine now. Now, how exactly do I go about testing these EGPIO settings? I see several EGPIO options in alsamixer--do I just adjust these and find something that works? Thanks -- Weijia Yang School of Electrical and Computer Engineering Georgia Institute of Technology Atlanta, GA ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf