From: Ben Greear <greearb@candelatech.com>
To: Jes Sorensen <jes@trained-monkey.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: can't run two acenics in the same machine??
Date: Fri, 27 Sep 2002 20:13:10 -0700 [thread overview]
Message-ID: <3D951E46.5070402@candelatech.com> (raw)
Since the e1000 keeps scribbling over my memory (it appears), I tried
to tie-break with two NetGear GA 620 nics.
Well, it only finds one!!
In the meantime, I hear that tigonIII is a reasonably good performer.
Anyone suggest a NIC based on this chipset that is well supported?
From dmesg:
acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk
http://home.cern.ch/~jes/gige/acenic.html
eth2: NetGear GA620 Gigabit Ethernet at 0xf4000000, irq 10
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:a0:cc:73:37:3a
PCI bus width: 64 bits, speed: 66MHz, latency: 64 clks
Disabling PCI memory write and invalidate
eth2: Firmware NOT running!
eth2: NetGear GA620 Gigabit Ethernet at 0xf4004000, irq 9
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:a0:cc:73:35:d6
PCI bus width: 64 bits, speed: 66MHz, latency: 64 clks
Disabling PCI memory write and invalidate
eth2: Firmware up and running
from lspci -v:
00:08.0 Ethernet controller: Netgear GA620 (rev 01)
Subsystem: Netgear: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
00:09.0 Ethernet controller: Netgear GA620 (rev 01)
Subsystem: Netgear: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4004000 (32-bit, non-prefetchable) [size=16K]
Any ideas?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
next reply other threads:[~2002-09-28 3:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-28 3:13 Ben Greear [this message]
2002-09-28 20:49 ` can't run two acenics in the same machine?? Steve Mickeler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D951E46.5070402@candelatech.com \
--to=greearb@candelatech.com \
--cc=jes@trained-monkey.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.