# /etc/ax25/node.conf
# configuration file for the node(8) program.
#
# Lines beginning with '#' are comments and are ignored.

# Hostname
# Specifies the hostname of the node machine.
#hostname	radio.gw.kj6eo.ampr.org

# Local Network
# allows you to specify what is considered 'local' for the
# purposes of permission checking using nodes.perms.
#localnet	44.16.2.102

# Hide Ports
# If specified allows you to make ports invisible to users.  The
# listed ports will not be listed by the (p)orts command.
#hiddenports	rose netrom

# Node Identification.
# This will appear in the node prompt
NodeId		SCV:KJ6EO-7

# NET/ROM port
# This is the name of the NET/ROM port that will be used for
# outgoing NET/ROM connections from the node.
NrPort		nr0

# Node Idle Timeout
# Specifies the idle time for connections to this node in seconds.
idletimout	1800

# Connection Idle Timeout
# Specifies the idle timer for the connections made via this node in
# seconds.
conntimeout	1800

# Reconnect
# Specifies weather users should be reconnected to the node when
# their remote connections disconnect, or weather they should be
# disconnected complete.
reconnect	on

# Command Aliases
# Provide a way of making complex node commands simple.
#alias		CONV	"telnet vk1xwt.ampr.org 3600"
#alias           BBS     "connect ax0 vk2xsb"

# External Command Aliases
# Provide a means of executing external commands under the node.
# extcmd <cmdname <flag> <userid> <command>
# Flag == 1 is the only implemented function.
# <command> is formated as per ax25d.conf
# extcmd	PMS	1	root	/usr/sbin/pms -u %U -o VK2KTJ

# Logging
# Set logging to the system log.  3 is the noisiest, 0 is disabled.
loglevel	3

# The escape character
# 20 = (Control-T)
EscapeChar	20
