From: Ben Greear <greearb@candelatech.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: tg3 and Netgear GA302T x 2 locks machine
Date: Thu, 03 Oct 2002 21:19:37 -0700 [thread overview]
Message-ID: <3D9D16D9.7040008@candelatech.com> (raw)
Got my two new Netgear GA302t nics today. They seem to use the
tg3 driver....
I put them into the 64/66 slots on my Tyan dual amd motherboard..
Running kernel 2.4.20-pre8
eth2 is plugged into eth3 over cross-over cable.
The tg3 found and used them, mostly:
tg3.c:v1.1 (Aug 30, 2002)
eth2: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:20:56
eth3: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:22:fd
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
...
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
tg3: eth3: Link is down.
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is on for TX and on for RX.
I tried to start traffic with pktgen, and the machine hangs solid.
The last thing I see is:
[root@localhost root]# tg3: eth2: transmit timed out, resetting
Any ideas? Is this NIC supposed to work with tg3?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
next reply other threads:[~2002-10-04 4:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-04 4:19 Ben Greear [this message]
2002-10-04 5:06 ` tg3 and Netgear GA302T x 2 locks machine Ben Greear
2002-10-04 15:52 ` James Morris
2002-10-05 5:50 ` Ben Greear
2002-10-04 21:24 ` David S. Miller
2002-10-05 1:20 ` James Morris
2002-10-05 1:15 ` David S. Miller
2002-10-05 6:03 ` Ben Greear
2002-10-05 20:08 ` Ben Greear
2002-10-06 4:23 ` David S. Miller
2002-10-06 4:58 ` Ben Greear
2002-10-05 2:01 ` Matthew N. Andrews
2002-10-05 5:47 ` Ben Greear
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D9D16D9.7040008@candelatech.com \
--to=greearb@candelatech.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.