From: James Courtier-Dutton <James@superbug.demon.co.uk>
To: Jaroslav Kysela <perex@perex.cz>
Cc: "alsa-devel@lists.sourceforge.net" <alsa-devel@lists.sourceforge.net>
Subject: Re: Problems with snd_pcm_hw_params_can_pause (). etc.
Date: Sun, 13 Oct 2002 00:08:44 +1000 [thread overview]
Message-ID: <3DA82CEC.2080307@superbug.demon.co.uk> (raw)
In-Reply-To: Pine.LNX.4.33.0210121533280.1975-100000@pnote.perex-int.cz
Jaroslav Kysela wrote:
>On Sat, 12 Oct 2002, James Courtier-Dutton wrote:
>
>
>
>>Currently, the state of play is that "snd_pcm_hw_params_can_pause ()"
>>should not be called until one has first done the first
>>"snd_pcm_hw_params()"
>>
>>I start with
>>snd_pcm_hw_params_any(this->audio_fd, params);
>>then go about setting params, e.g.
>>snd_pcm_hw_params_set_access()
>>snd_pcm_hw_params_set_format()
>>etc.
>>Then
>>snd_pcm_hw_params()
>>then
>>snd_pcm_hw_params_can_pause (params)
>>
>>If the "snd_pcm_hw_params_can_pause (params)" goes before the
>>"snd_pcm_hw_params()" an invalid result is returned. I.E. the result is
>>always 1 even for cards which don't support it.
>>
>>I think the documentation should make it clear when one should use
>>"snd_pcm_hw_params_can_pause ()".
>>or maybe "snd_pcm_hw_params_any()" should be modified to correctly fill
>>the "can_pause" bit.
>>Maybe I have missunderstood the API, but I would prefer the approach of
>>first retrieving the current hw params, then go about modifying it, then
>>writting it back. If one has not set any hw params yet, it would fill
>>
>>
>
>But what's "current configuration"? What you want to prefer? rate?
>channels? period_size? No, application should give these hints to driver.
>
>
>
>>the structure with the most general case, then allow the application to
>>set params to further restrict the config.
>>I had assumed that "snd_pcm_hw_params_any()" did the retrieving of the
>>current hw params, but reset to the least restrictive settings. I don't
>>think "can_pause" is anything an application can set, the hardware on
>>the card decides that, so the "snd_pcm_hw_params_any()" should cause
>>"can_pause" to return a valid setting that matches the hardware, instead
>>of having to wait for the params to be written to the card with
>>"snd_pcm_hw_params()" before "can_pause" is set accurately.
>>
>>
>
>All these functions needs exactly one configuration at input.
>The snd_pcm_hw_params() function chooses one configuration and sets it to
>hardware. I've updated documentation.
>
> Jaroslav
>
>
>
Thanks for the documentation update. I currently use the inline docs
contained in alsa-lib/pcm/pcm.c. Is that the ones you update ? I only
mentioned it because I made the mistake of putting the can_pause()
before the snd_pcm_hw_params() without knowing that it would not work
correctly, so I just wanted the documentation to be updated so that no
one else would make the same mistake.
I think the point I was trying to make is that one should be able to call
snd_pcm_hw_can_pause() at any time. One should not have to wait until
one has snd_pcm_hw_params() has been called. At this point I am assuming
that the result of "snd_pcm_hw_can_pause()" is always constant, and does
not depend of any hw_params that have been set. But now I come to think
of it, this might not be true. I think the SB Live can do pause/resume
in normal mode, but cannot do it in AC3 passthru mode using the DSP TRAM.
But as a general point, this does not really matter too much to me now,
because I will be using snd_pcm_hw_params_current() that you have kindly
added to the API. ;-)
I will have to wait until the next release of alsa09 before I actually
code the change, because I cannot expect all my users to install alsa09
from CVS. :-(
As a sub note, maybe snd_pcm_can_pause() should return some sort of
error code, or throw an assert if the application programmer has put it
before snd_pcm_hw_params() instead of returning a perfectly useable
result that is baseless. I think an assert() would be acceptable, as
this is a application programming error and not a user initiated error.
It would then force the application programmer to "get it right first
time". ;-)
Cheers
James
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2002-10-12 14:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-12 13:15 Problems with snd_pcm_hw_params_can_pause (). etc James Courtier-Dutton
2002-10-12 13:37 ` Jaroslav Kysela
2002-10-12 14:08 ` James Courtier-Dutton [this message]
2002-10-12 14:30 ` Jaroslav Kysela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DA82CEC.2080307@superbug.demon.co.uk \
--to=james@superbug.demon.co.uk \
--cc=alsa-devel@lists.sourceforge.net \
--cc=perex@perex.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.